JDMxDB8
Raceline USA
Nice steering wheel.just an update.
bought this for the teg.
i'll get the real pictures once it gets here.
It's in the mail. Looking to get works bell stuff to go along with it.
HALF USM / HALF JDM (56k..go get a drink)
- Thread starter konerri
- Start date
Samurai_Blue
Yolo Whippin'
i wasnt liking it at first but then i took a closer look and reilized it has all you really need on a racing wheel good choice!^thanks, i wanted a no bullshit, this is a man's car, type of look. So that's why i choose this steering wheel. It looks a lot better in real life, believe me.
95 modified
New Member
sweet pictures.
konerri
New Member
well it's been a while since I've updated because i haven't bought anything new in the past month. A couple of minutes ago i just purchased new carpet from stockinteriors.com. It will be a dark gray color, almost black. Then purchased my racing seat belts from Crow Enterprizes in black.
Some of you know about all the parts that i have and some are still wondering what i am planning. Well in the next couple of months i hope to finish this build. If not, not later then the end of summer.
These parts are chosen after many hours of comparing to others. Selection was based on color scheme(red, black and a little polish acttion) and of coasre Function. These are the things i still need to buy and I've made up my mind.
Interior:
2x Mugen S1r seats
2. Mugen S1r rails
Mugen rear view mirror cover
s2000 start button for an integra
Works bell quick release and adapter
Sparco harness bar.
Some essential gauges
Get s2000 cluster project finished and working.
Some custom carpet work for the trunk area by me.
Exterior:
Spoon lower tie bar
Stop-tech Oem Sized Aero-rotors Front and Back with Zinc coating.
Hawk hp+ pads.
Spoon calipers-pending income.
Some how, make a J's racing ram air duct for the driver side.
Some how make a diffuser for the back.
Some how make a front splitter.
Oh yeah and paint the car NEW FORMULA RED(NFR)
Engine Bay:
JDM K20A swap
Exedy street stage 1 clutch and 8.7 ib flywheel.
All the adapter things from hybid-racing.com
Full size metal Hybrid racing radiator.
DRIVE SHAFT SHOP road racing axles
RCrew race header
T1R 70mm header back exhaust system
Hondata Kpro
k-tuned Alternator relocate kit.
Re-run all brake lines because of a full wire tuck. Still want to keep ABS.
Trying to find an electic motor to power the power steering system.
Not to mention all of little things l forgot about.
As you can see i still have a lot of things to get. Wish me some luck as i begin to dump a shit load of money.
Some of you know about all the parts that i have and some are still wondering what i am planning. Well in the next couple of months i hope to finish this build. If not, not later then the end of summer.
These parts are chosen after many hours of comparing to others. Selection was based on color scheme(red, black and a little polish acttion) and of coasre Function. These are the things i still need to buy and I've made up my mind.
Interior:
2x Mugen S1r seats
2. Mugen S1r rails
Mugen rear view mirror cover
s2000 start button for an integra
Works bell quick release and adapter
Sparco harness bar.
Some essential gauges
Get s2000 cluster project finished and working.
Some custom carpet work for the trunk area by me.
Exterior:
Spoon lower tie bar
Stop-tech Oem Sized Aero-rotors Front and Back with Zinc coating.
Hawk hp+ pads.
Spoon calipers-pending income.
Some how, make a J's racing ram air duct for the driver side.
Some how make a diffuser for the back.
Some how make a front splitter.
Oh yeah and paint the car NEW FORMULA RED(NFR)
Engine Bay:
JDM K20A swap
Exedy street stage 1 clutch and 8.7 ib flywheel.
All the adapter things from hybid-racing.com
Full size metal Hybrid racing radiator.
DRIVE SHAFT SHOP road racing axles
RCrew race header
T1R 70mm header back exhaust system
Hondata Kpro
k-tuned Alternator relocate kit.
Re-run all brake lines because of a full wire tuck. Still want to keep ABS.
Trying to find an electic motor to power the power steering system.
Not to mention all of little things l forgot about.
As you can see i still have a lot of things to get. Wish me some luck as i begin to dump a shit load of money.
Last edited:
Ominous G2
┌∩┐(◣_◢)┌∩┐
What ever happened with your brothers car? I liked his civic.
Nice updates, how's the wire tuck going?
Nice updates, how's the wire tuck going?
konerri
New Member
What ever happened with your brothers car? I liked his civic.
Nice updates, how's the wire tuck going?
You do not know? it was stolen and stripped. lost everything, some my parts were on it.
Thanks man.nice car bro!
Sparco, my bad.I made a list for the DC2, but I don't want to spill the beans just quite yet. You might want to pick a different header. I heard R-Crew is going out of business. And do you mean Sparco for the harness bar?
i didn't let the list out before because i was still debating a lot of things. Now that the list isn't going to change i might as well let you all know so you can plan your builds also. Remember ROTY 2009. I want to inspire some good builds this year by giving out my list of mods early in the year.
JDMxDB8
Raceline USA
Sounds good man. I would've thought that you'd get a roll bar/cage. Oh yeah, I wanted to tell you... APR can make you a front splitter. You just have to do the measurements yourself using cardboard. I also recommend that you get a pair of canards too. Road racing Integras FTW! :thumbs up
konerri
New Member
any idea how much it will cost to get them to make a splitter?Sounds good man. I would've thought that you'd get a roll bar/cage. Oh yeah, I wanted to tell you... APR can make you a front splitter. You just have to do the measurements yourself using cardboard. I also recommend that you get a pair of canards too. Road racing Integras FTW! :thumbs up
JDMxDB8
Raceline USA
$300. A lot of my track buddies have them on their cars. I'm planning to get one for the DC2 as well.any idea how much it will cost to get them to make a splitter?
Ominous G2
┌∩┐(◣_◢)┌∩┐
I knew it got stolen, but I wasn't sure if they recovered it.You do not know? it was stolen and stripped. lost everything, some my parts were on it.
konerri
New Member
What material do they use? Carbon fiber or something else?$300. A lot of my track buddies have them on their cars. I'm planning to get one for the DC2 as well.