seat belt ding

[axetenchu]

i took out my stock seat belt completely and put in fourpoint harnesses... but the dinging wont stop for the seat belts how do i make it stop so i can drive without going effin nuts:shock:

 

[dc2GS-R]

You could just unplug the sensor underneath the driver seat.

Or take out the buzzer if you want to eliminate all of the alerts.

Or cut the wire that supplies the seatbelt sound signal

 

[hamfacekilla]

you dont need to do all that, just pull out the fuse for it under the passenger side panel.

 

[axetenchu]

i have racing seat in drivers and seat belt and all the plugs were taking out of the passanger...ill try the passanger panel fuse i thoughti checked all the fuses

 

[hamfacekilla]

yeah i have otto R racing seats and harnesses and cut off the seat belt buckles and then just ripped the fuse for the seat belt

 

[dc2GS-R]

you dont need to do all that, just pull out the fuse for it under the passenger side panel.

The fuse controls more than just the seatbelt sensor

 

[hamfacekilla]

like what cause i pulled mine out and i didnt see anything change?

 

[axetenchu]

where is the fuse for seat belt only ones ican find are the passive fuses for the seat belt motors i took those out it still beeps

 

[master_tech]

since your not using the auto shoulder seat belt system, disconnect the (2) main connectors plugged into the auto shoulder belt control unit. it's located behind the passenger side front kick panel