How to remove extra spray paint on body?

[93loweredf1]

HI im looking what is the best way to remove spraypaint on my doors because the last ower just spray painted the body moldings white and didnt tape or prep the area before spraying. any suggestions thnks?

 

[chrisjames]

wet sand with a fine grit maybe?

 

[Samurai_Blue]

wet sand and use a clear coat

 

[Sammich]

wet sand and use a clear coat

WHY NOT BUFF AFTER WETSANDING?

 

[TegSox]

Try a clay bar. It worked for me getting overspary from body shops off, it got overspray off my rims too.

 

[G3GirL]

claybar.

 

[Samurai_Blue]

WHY NOT BUFF AFTER WETSANDING?

skipped a step

 

[99sil-teg]

I always just wet sand and then buff on it.

 

[jdmjim]

my fave is lacquer thinner.

 

[93loweredf1]

yeah i have tried the mothers clay bar on it and got a lil but but the overspray is massive and i dont think it would get all dat. i also tried some rubbing alcohol but i dont think that worked eather. but im going to re clay it and then maybe wet sand it a little see how it turns out. thanks for all the input guys

 

[G3GirL]

what about a heavy-duty rubbing compound?

 

[Vanhandle]

Wet sand WILL remove overspray. It might take you a while, but it will. I wouldn't use anything courser than 1500 unless you want to spend a lot of time smoothing it out with 2000. Just be careful not to wet sand into your factory paint and buff everything up after.