99 integra b&m fpr setting

[silvertegls]

I have a 99 integra ls with aftermaket filter and i took all the box shit out that make the intake quiet.The car also has a 2 1/4 inch exhuast. I have a b&m fpr that i want to put on my ls but i dont have the gauge so i can adjust the fpr and i dont have the money to buy one right now. I was wondering if there is a certain amount of turns i can screw it in or out to set it a couple psi above stock setiing.

 

[dc2GS-R]

There is no need to change the fuel pressure if you only have an intake and exhaust. It will run too rich

 

[silvertegls]

There is no need to change the fuel pressure if you only have an intake and exhaust. It will run too rich

i just want to put it on there to dress up the engine a little bit cause its just setting in my garage why not put it on.

 

[VietTeg_12]

IMO you could just sell the thing if you're just gonna have I/H/E cuz you'll just be killing your gas mileage. if it's not gonna serve a beneficial purpose then why put it on? if you sell it, that's money in your pocket for other parts that you need

 

[silvertegls]

dose anybody no if i can adjust the fpr like im saying. without the gauge

 

[silvertegls]

nobody noes if there is a way to adjust the fpr without a gauge. If there isn't way way then can you at least tel me there isn't a way and not just tell me that's stupid just sell it you don't need it i have been trying to sell it nobody wants it so i want to put it on my car

 

[Teidullie]

I dont think there is a way to do that w/o the gauge

 

[dc2GS-R]

Adjusting it without a gauge is just called guessing. If you want to take a wild ass guess at what your fuel pressure may be, good luck to you.

 

[Aussie]

Your not going to be able to tell what psi your at without a guage. If your going to put it on the best bet would be to open it up all the way.

 

[silvertegls]

Your not going to be able to tell what psi your at without a guage. If your going to put it on the best bet would be to open it up all the way.

alright cool ill probably just try to put me together some stuf and find a gauge

 

[silvertegls]

Your not going to be able to tell what psi your at without a guage. If your going to put it on the best bet would be to open it up all the way.

alright i cut my fpr and put the b&m on i tryed to start the car with it all the way out but it wouldnt It was way to low. So i just went half a turn till the idle smothed out and now my car runs slot better. My car was actually running a little rich b4 now it is alot better.But ill still be getting a gauge soon.

 

[GSROWNSU]

curious how "close" you really got it....let us know what psi your getting from the gauge before you adjust it. I bet your still way off. How can you say your car was running rich before with the stock fuel pressure? Like everyone said it's not needed to be changed with the mods you have.

 

[silvertegls]

curious how "close" you really got it....let us know what psi your getting from the gauge before you adjust it. I bet your still way off. How can you say your car was running rich before with the stock fuel pressure? Like everyone said it's not needed to be changed with the mods you have.

haha alright ill let yall no what it is when i get the gauge. Yea it was running rich im not saying becasue of the fpr but the number one o2 sensor was out and it was running pretty rich.

 

[Aussie]

better hope your not running it lean or you'll burn your valves up

 

[silvertegls]

better hope your not running it lean or you'll burn your valves up

its still running alitlle rich just not as much as rich as it was it was backfiring when i let of the gas and the alot of black smoke when i got on it. Now it dosnt backfire but there is still a little black smoke coming out. I no for sure its not running lean i can tell when i car is running lean or runnning rich but im still going to get the gauge to make sure.