8urcivics all-motor build

JDMxDB8

Raceline USA
no sir.....my head was not only milled 21 thousands.......its a gsr head....on a gsr block....same pistons.


explain how yours is higher?
Are you really going to boost now?
 


no sir.....my head was not only milled 21 thousands.......its a gsr head....on a gsr block....same pistons.


explain how yours is higher?
I forgot that you had milled it that much. My rod strke is longer, so it helps. The guys at the shop here said they estimate that Im somewhere between 12.5 and 13:1. I need to figure out how to convert the PSI of a compression test to the "x:1" ratio.

Matt, he's just yanking your chain about the boost.
 

JDMxDB8

Raceline USA
I forgot that you had milled it that much. My rod strke is longer, so it helps. The guys at the shop here said they estimate that Im somewhere between 12.5 and 13:1. I need to figure out how to convert the PSI of a compression test to the "x:1" ratio.

Matt, he's just yanking your chain about the boost.
Yeah, he told me earlier. Me = gullible
 

8urcivic

ONLY couches pull out!!!!
finishing up the final baking process of my valve cover......then ill shave it and post up some pics.
 
Top