cut my lip down to keep from scraping?

stert

New Member
so i just got my integra and the previous owner put a "custom" lip on it. it looks unusually thick, as in close to the ground.
pics:
[/IMG]
[/IMG]
[/IMG]

does it look unusually long towards the ground?

i was thinking of cutting it short. right where that little indent is that runs the length of the lip. that would give me a decent amount of extra clearance without having to lift the car any.

what do you think?
 

g0tsh0p0w619

Team ShoPow San Diego!
looking at you wheels, I think you might need bigger tires also. Are your rims 16's? Cause with 15's and 16's low pros are not a good idea. It will also raise your car up by an inch or inch and a half the most. Diggin the lip though!
 

Ominous G2

┌∩┐(◣_◢)┌∩┐
Definetly the Mugen half bumper lip, I'm also curious about the tire size.

Even in this pic with an 8 inch wheel gap it looks pretty low.
 

g0tsh0p0w619

Team ShoPow San Diego!
Ominous G2 said:
Definetly the Mugen half bumper lip, I'm also curious about the tire size.

Even in this pic with an 8 inch wheel gap it looks pretty low.
Click to expand...
Even in this pic with an 8 inch wheel gap it looks pretty low.
[/QUOTE]

It's not the mugen half bumper lip. they have the two oval slot/holes what ever you want to call em. i had the that lip before or either thet filled in the hole... hmmmmm...
 

Samurai_Blue

Yolo Whippin'
not a fan of these half bumper lips, but good job on the cutting! just need to paint it now IMO
 


stert

New Member
they are 16" wheels with a 205/40/16 tire on there

im going to try to fit a 225/50/16 on there tho.
 

g0tsh0p0w619

Team ShoPow San Diego!
I say try getting your new tires first and from decided if you still want to trim you front lip. Or you alsways sell that lip and buy another with a higher ground clearance.
 
You must log in or register to reply here.
Top