some help, coilover install

[acteg94]

i want to put coilovers on my 94 and i have them but when i tried the bolt that goes through the strut and control arm wouldnt come out. wat can i do to fix that?

 

[hmongkie]

the rear lower control arms?.... hahahahahahhahahhahahahahaaha... welcome to the wonderful world of honda....

i cut the damn bolt... but that's because i was also intalling my new lca's...

 

[acteg94]

yea i had to cut one bolt.. but i only had one to replace it so im still ridin around wit coilovers in my back seat

 

[kantstandlam]

yea i would use a breaker bar.. but when i did it broke the bushing so i ended up cutting the stock strut and bought new control arms. but was hella worth it

 

[jdmjim]

just make shure when u get it back together to use anti-sieze.

 

[Kuchtaboy]

yea i would use a breaker bar.. but when i did it broke the bushing so i ended up cutting the stock strut and bought new control arms. but was hella worth it

Breaker bar = broken bolts.


If you're lucky enough to get it out in one piece you're one of few... but I suggest you get some new lca's, or at least bushings and a couple bolts. When I replaced my lca's I just got all 6 of those bolts under there new... expensive, but worth it. Those are 11 dollars a bolt! lol