94 GSR question, engine install

[MJ94gsr]

I have a 94 gsr that im replacing the motor, and can't seem to figure out where this rubber bushing goes. It came from underneath the car. Any help would be appreciated, also i'm not quite sure how to post pictures, so i made it my pic for under my screen name. thank u

 

[DailyDB8]

[ img] INSERT HTTP LINK HERE [ /IMG]

*without the spaces*

 

[MJ94gsr]

i have the picture on my laptop under my pictures, dunno how to link it

 

[MJ94gsr]

here's a pic of it, if anyone can help me out. thanks

 

[Aussie]

dude that looks like it's from the door lock. WTF?

 

[Nighthawk]

I'm not positive on this...but I think its the rubber piece that allows entry through the firewall.

 

[master_tech]

whats the diameter of it?

 

[MJ94gsr]

I'll check the diameter of it when i get home, at work now, but in this pic its seen next to the shift linkage, to show size comparison a lil. but i havent touched the firewall for anything to come out, i will check though.

 

[Aussie]

I'm not positive on this...but I think its the rubber piece that allows entry through the firewall.

Yea I think your right. Probablly came off from the harness.

 

[MJ94gsr]

the outside diameter-4.25in,
the inside diameter- 7/8th of an inch, and the slot part of the inner diameter is 1-1/8th inch

 

[MJ94gsr]

The thickness of the spacer is 1/4 of an inch

 

[master_tech]

there is suppose to be (2) of those and the location of where they go is @ the drivers side engine mount. one is placed in front of the mount and the other is placed on the backside the mount. my guess is they act as a cushions, covers or both for that engine mount. pm me ur email if you need a pic