Got a DB7
- Thread starter dylan si
- Start date
G3GirL
UUUHHHH-OOOOHHHHHHH...!!!
^depends on what it's made of and whether there'd be any fitment issues. sometimes 'ebay' and 'quality' just don't go well together. you can always try your luck. just make sure you can return it if it doesn't fit correctly and that the seller has tons of positive feedback.
polyurethane > abs plastic > fiberglass
polyurethane > abs plastic > fiberglass
dylan si
wannabe
Yeah thats what i figured...the most i have seen are poly or ABS...i wont waste my money on fiberglass^depends on what it's made of and whether there'd be any fitment issues. sometimes 'ebay' and 'quality' just don't go well together. you can always try your luck. just make sure you can return it if it doesn't fit correctly and that the seller has tons of positive feedback.
polyurethane > abs plastic > fiberglass
Yes they are out to much but i like the way it looks now...all i need is a nice lip and maybe some sidesLooks like the wheels are sticking out too much. Can't slam it without hitting the fender. Offset is too low.
JDMxDB8
Raceline USA
You could try, but I'm not sure it's going to eliminate the rubbing issue.ok it rubs like a bish...i guess iam going to try rolling the fenders and throwing on a camber kit and adding some negative camber. Hope that works?
Samurai_Blue
Yolo Whippin'
maybe smaller tires and raise it up a little
dylan si
wannabe
I dont know what else to do? I am hoping it will work. I dont think the front was rubbing just the rear. Maybe i should have got the +30 offset.You could try, but I'm not sure it's going to eliminate the rubbing issue.
I hope i dont have to do that.maybe smaller tires and raise it up a little
Isnt there anyone in here that has done the same thing? I have searched and cant find anything
dylan si
wannabe
yeah i am still gonna try to make these work. I dont mind they way it looks sticking cause it is different. But i dont want my tires to be rubbing. I am in the process of finding good rear camber arms and LCAs. Through some negative camber on it and see what that will doYeah, the +30 offset would have been the smart thing to do. It's cool. We all learn from our mistakes.
JDMxDB8
Raceline USA
Good move.sending back the +10 for some +40 offset
BrokenTalon27
W.F.O
sounds like a reasonable ideathanks man...those +10s were going to be way to much work...not worth it. I would rather have a snail under the hood