Few small mods. Help

[__Q]

I would like to do a few small mods to my car, rear windshield wiper delete, and shave my moldings. For the rear wiper is there anything special i have to do? If someone could let me know about that. All i know is i need a 7/8 inch plug but i dont know where to get them. also for the moldings what will i all need to do these. thanks.

 

[dc2GS-R]

I would like to do a few small mods to my car, rear windshield wiper delete, and shave my moldings. For the rear wiper is there anything special i have to do? If someone could let me know about that. All i know is i need a 7/8 inch plug but i dont know where to get them. also for the moldings what will i all need to do these. thanks.

You can buy a plug for the rear wiper from the Honda dealership. The side moldings have holes behind them once removed. In order to shave the side moldings you have to fill the holes (weld them), and paint the car.

 

[Spody02]

dont get the plug from honda
you can get it at home depot for like 50 cents
and all you do is take your wiper apart
not hard take the rubber piece put it back in
put the plug in there you go
its a 7/8 nylon plug in the hardware section
toke me like 30 mins to find it walking around that store
pm me if you need help its real easy

 

[G3GirL]

In order to shave the side moldings you have to fill the holes (weld them), and paint the car.

^ x2...welding is the only way to go for the side moldings. Don't go cheap by just filling it with junk.

 

[heykosal]

Shove some gum in there and then spray over it. lol j/k!

 

[speedin]

For the rear wiper delete you mine as well use a bit of black rtv silicone as well to guarantee a seal.

 

[oppi-10]

to take your side moldings off take off your door skins and theres abuncha clips holdin them in just get some pliars and squeeze them and then pull them off its pretty easy since there not glued on or mine werent haha dont think they are tho

 

[cooki3monstr]

for the rear wiper plug, there is one that fits perfectly on the firewall near the battery.

 

[__Q]

aight so i think im going to go with spodys idea and just pick one up at home depot tomorrow. hope i can find it haha

 

[G3GirL]

to take your side moldings off take off your door skins and theres abuncha clips holdin them in just get some pliars and squeeze them and then pull them off its pretty easy since there not glued on or mine werent haha dont think they are tho

don't forget the screws in the door jamb.