94-97 si-vtec lip 'where to buy from'

ixcocoyxi

RS owner
if you hav a 94-97 integ and looking to get the si-vtec lip.. ill let you know wheres the best place to get it..

ive had 2 si-vtec lips and the first one (jdmsh!t) broke in 2 pieces and missing a chunk. they claimed it was polyurethane and it clearly isnt. its more like a thick plastic. there was little flexability and tabs broken from daily driving.. when i removed the old one.. 4 of the tabs (all in front near grill area) were all broken off and fitment wasnt that great.. wasnt awful either..

the second one (weksos) IS polyurethane and has very much flexability.. a lot more than the one from jdmsh!t (jdmsh!t costs a bit cheaper btw) and fitment is spot-on! before i installed the new lip (thanks matt!! <3) i did a flex test on the two.. i bent the one from weksos quite a bit and held up fine.. went back to its original shape with no damage.. i tried to the the old lip from jdmsh!t to bend that far and guess what.. SNAP!!

had a little trouble getting a bolt thru on one side but i got it in with some determination.. but other than that.. i could already tell that the lip from weksos is 10x's better than the one from jdmsh!t

but hey.. who am i to tell you where to buy from? ive experienced it so its really up to you..

thanks again matt for the sale!!
oh yeah.. and i left postivie feedback for you :thumbs up
 
Last edited:

96teggy088

New Member
i got my si-vtec lip from hmotorsports....another website from JDMshit and it has perfect fitment and IS poly urathane. So idk what happend to the one you got but you should have called them about it.
 

ixcocoyxi

RS owner
i did call them and asked and assured me it was polyurethane.. but i guess.. its in the past and i just wanted to share my experience..
 

JDMxDB8

Raceline USA
Good reviews Coy. And no problem. Any time man. I'm glad you like your new Si-VTEC lip.

P.S. Thanks for the iTrader rating!
 


96GotSomeRice

i Hate ricers.Keep it OEM
hey coy...will that 94-97 si vtec lip fit on the usdm dc2 front bumper? because i looked on weaksauce and on the pic that they had, it looked like the bumper was different from the oem usdm front bumper?
 

ixcocoyxi

RS owner
96GotSomeRice said:
hey coy...will that 94-97 si vtec lip fit on the usdm dc2 front bumper? because i looked on weaksauce and on the pic that they had, it looked like the bumper was different from the oem usdm front bumper?
Click to expand...
as long as you have the usdm 94-97 any model (ls, rs, gsr, etc..) it will fit.. just make sure you have a front like this..

heres a pic of my car for reference w/the si-vtec lip on..



just be aware that you'll have to drill 4 holes into the lower (black part) of the bumper
 

8urcivic

ONLY couches pull out!!!!
i know mine a 98-01////but i got mine from jdmshit.com and its abs plastic.......i havny had any problems.




all in all........you can go wrong with oem!
 
You must log in or register to reply here.
Top