Looking for a good turbo

Status
Not open for further replies.

DA_Integra

Not White, Pearl White
patrick4588 said:
considered a t3/60-1? full race sells them for 688+15 or 20 for shipping. http://www.full-race.com/catalog/product_info.php?cPath=214_698&products_id=251&osCsid=cfc053973d1a5a0afd3cc267330bd168 pretty good turbo for 450whp, and its not too pricey compared to others. i have never had an issue with spoolinperformance, i have always used their manifolds on my builds. i have their intercooler and traction bars too. phil is a good guy and normally does things pretty quick too.
Click to expand...
I actually was looking at a garret t3/60-1 turbo sounds like a decent turbo to go with for the power I'm looking for.

http://cgi.ebay.com/ebaymotors/Brand-New-REAL-GARRETT-T3-60-1-Turbo-t3-t4_W0QQcmdZViewItemQQcategoryZ6755QQihZ008QQitemZ180250642213QQrdZ1QQsspagenameZWDVW
 

BrokenTalon27

W.F.O
I had a PTE SC6152e on my Talon. It was a good turbo_On the Talon it was supposed to peak around 620 AWHP. I believe that they offer it with a dual ball bearing center section now, rather than the journal bearings that were in previous models. And Precision uses Garrett components too.
 


genesis

tougê hêrmit
if you want a t3/t4 turbonetics turbo cheap with no end play let me know i have one sitting in my garage there is no endplay and the turbo has really low miles. its my buddys so if your interested ill let him know and get a price for you!
 

BrokenTalon27

W.F.O
genesis said:
if you want a t3/t4 turbonetics turbo cheap with no end play let me know i have one sitting in my garage there is no endplay and the turbo has really low miles. its my buddys so if your interested ill let him know and get a price for you!
Click to expand...
End play??? Do you mean shaft play?
 


patrick4588

Integra God
log manifolds give you a quicker spool, but cant support really high hp levels, and their powerbands start earlier and fall earlier. the inlinepro is the mac daddy of log manifolds, and ppl have made 600hp on them. top mounts will support a really high hp level and their powerbands are more to the top end of things. also, extremely large turbo's are hard to fit in the bay and top mounts are able to fit most. ramhorn is a compromise in the middle
 

DA_Integra

Not White, Pearl White
patrick4588 said:
log manifolds give you a quicker spool, but cant support really high hp levels, and their powerbands start earlier and fall earlier. the inlinepro is the mac daddy of log manifolds, and ppl have made 600hp on them. top mounts will support a really high hp level and their powerbands are more to the top end of things. also, extremely large turbo's are hard to fit in the bay and top mounts are able to fit most. ramhorn is a compromise in the middle
Click to expand...
O.k. how about the shorty I been looking into the SLS shorty.
 
Status
Not open for further replies.
Top