Looking for a good turbo

[DA_Integra]

O.k. got some extra money and it's time to start buying turbo parts I'm looking for a good place where I can buy a t3/t4 turbo with a .50 trim and a turbo manifold. Any good places or brands I should look into? Any info would be great.

 

[Ominous G2]

www.straightlinespecialties.com
PeakBoost: http://cheapturbo.stores.yahoo.net/hobtukit.html
www.spoolinperformance.com
http://www.inlinepro.com/

 

[DA_Integra]

Thanks Scott sold the crx this weekend to get money to buy this stuff.

 

[heykosal]

mine, buy it.

t3/t04e 60 trim with a .63 a/r Garrett part no. 466159-5004

 

[Ominous G2]

Just a heads up, a friend of mine is having issues with spoolin. Seems like that guy is slackin. SLS and PeakBoost makes a sick as hell manifolds though.....somebody will say Full-Race in a few minutes.

I also like that Spoolin and SLS show a close up of the welds on the homepage, not a couple glamour shots like SSautochrome.

 

[heykosal]

SLS manifolds are soooo sexy, Dan(GSROWNSU) has an SLS shorty I believe?

Its like the perfect setup. Ask him about it.

On a budget, Spoolin makes a great log. And it's about $100 cheaper than InlinePro's log:thumbs up

 

[Spody02]

top mount!

 

[DA_Integra]

So what's the diff between the different manifolds?

 

[Integraguy04]

O.k. got some extra money and it's time to start buying turbo parts I'm looking for a good place where I can buy a t3/t4 turbo with a .50 trim and a turbo manifold. Any good places or brands I should look into? Any info would be great.

y not go with the Garrett GT28RS...cant go wrong with a disco potato

 

[DA_Integra]

y not go with the Garrett GT28RS...cant go wrong with a disco potato

I don't even know what kinda turbo that is I'm new to all this turbo stuff and slowly learning more and more about it each day.

 

[Integraguy04]

I don't even know what kinda turbo that is I'm new to all this turbo stuff and slowly learning more and more about it each day.

Its a Garrett Dual Ball-Bearing Turbo that is prolly "THE" turbo for a honda motor unless you plan on making more than 350whp. It spools up really quickly...usually people get full boost at like 3K or so (depends on the setup)...
Click Here-Garrett's Website

 

[DA_Integra]

Its a Garrett Dual Ball-Bearing Turbo that is prolly "THE" turbo for a honda motor unless you plan on making more than 350whp. It spools up really quickly...usually people get full boost at like 3K or so (depends on the setup)...
Click Here-Garrett's Website

O.k. gotcha I'm looking for more then 350whp that's why I was told to go with the t3/t4 turbo.

 

[Integraguy04]

O.k. gotcha I'm looking for more then 350whp that's why I was told to go with the t3/t4 turbo.

ok gotcha...well if you want i know how to read the compressor charts for turbos so lemme get on Garrett's website and see what information i need from you and ill get back to you


ok i need your target HP, Engine Disp., Max RPM

 

[DA_Integra]

ok gotcha...well if you want i know how to read the compressor charts for turbos so lemme get on Garrett's website and see what information i need from you and ill get back to you


ok i need your target HP, Engine Disp., Max RPM

I'm shooting for 400-450whp.

 

[patrick4588]

considered a t3/60-1? full race sells them for 688+15 or 20 for shipping. http://www.full-race.com/catalog/product_info.php?cPath=214_698&products_id=251&osCsid=cfc053973d1a5a0afd3cc267330bd168 pretty good turbo for 450whp, and its not too pricey compared to others. i have never had an issue with spoolinperformance, i have always used their manifolds on my builds. i have their intercooler and traction bars too. phil is a good guy and normally does things pretty quick too.