LS Turbo???

biggame

New Member
Hey, I have a 1995 Integra LS, it has close to 160,000 miles on it n i was planning on turboing it on like 6-8PSI... problem is one of my cylinders has 35% leakage. So i figured change the rings on that piston... do i really need to hone the block or nething else i was tryin to keep engine in the car and jus turbo it for the time being until i had the money to build the bottom end right for serious boost... Thanks guys...
 

patrick4588

Integra God
if you are going to replace one ring, do them all. and i would at least replace all the bearings as well.
 

biggame

New Member
so should i jus pull the engine n replace all rings and bearings n have it honed...
 


patrick4588

Integra God
i would. if you got money, i would swap for a set of forged pistons and rods so you can make some good power
 

Kuchtaboy

Unregistered User
Nope

Boosting your honda can't be done... Seach all over these boards and you won't see a single one turbo charged......
 

santanard

VTAKKKK
Lol ^^^

I would do everything you want to do when you take the motor out, so you wont have to keep taking it out
 

Winki

Undercover mod
Kuchtaboy said:
Nope

Boosting your honda can't be done... Seach all over these boards and you won't see a single one turbo charged......
Click to expand...
what he said. and we all praise the mighty D16 :D
but you might as well build than boost if your shits already fucked. so get so good rods a pistons
 

1caintegra

type-s and the RS
if ur motors weak now rebuild it with new ring all 4 and bearing and head gasket for saftey anyway u boost stock block it u want.bur before u do check my sig
 
Last edited:
You must log in or register to reply here.
Top