HOW TO: Install GReddy Air Diversion Plate

PogKai

B20VTEC
You'll need a 10mm socket and a ratchet for it.. here we go!

First unbolt the radiator holding brackets (2)


Then unbolt the A/C line holding bracket


Now it's time to put the GReddy plate, guide thru the radiator bracket and put it in place. Bolt everything back again and that's it!



time: less than 10 mins.
difficulty: easy

and if you didn't use gloves, clean the fingers digits on the plate.


***NOTE: the manual says it fits for 96-99 teg's, I have a 00 and didn't fit without modification.. what I did is eliminated the left (passenger side) radiator holding bracket and now fits fine..didn't check with the engine on for rattle tho***
 

PogKai

B20VTEC
teggyls said:
whats the purpose of that plate
Click to expand...
"Made from 1mm Aluminum and embossed with the GReddy logo, the Air Diversion Panels are designed to not only improve under the engine looks, but to contain airflow to the radiator core, thus, improve cooling efficiency"
 

teggyls

STREET SAMURAI
where did you order that from i've only seen them for the jdm front end integras and how much was it
 


PogKai

B20VTEC
teggyls said:
where did you order that from i've only seen them for the jdm front end integras and how much was it
Click to expand...
eBay..
seller: d4auto888
price: $48.95 s/h not included

I bought two from him.. the other one is for one of my buddies for his scion tC
 

sonicvybe

new driver
If thats just a flat piece of aluminum sheet with some cuts, then it might not make a difficult DIY.
 
You must log in or register to reply here.
Top