Boosting a stock B18B1

[Sleeper]

I am working on boosting my stock b18b1. I am just curious if anyone here has already done this and what parts they used. Also some dyno numbers would be great.

I would like to get around 200WHP and here are the parts I have so far.

40mm Greddy Type RS BOV
38mm Tial Waste Gate
Stainless Steel Ram Horn Manifold
Precision 525cc Injectors

I would like to go with a T3/T4 A/R 63 turbo.

 

[heykosal]

on top of those things:
downpipe
intercooler and piping
oil feed and return lines
freer flowing exhaust
clutch/flywheel
and maybe a higher capacity fuel pump?

 

[Sleeper]

on top of those things:
downpipe
intercooler and piping
oil feed and return lines
freer flowing exhaust
clutch/flywheel
and maybe a higher capacity fuel pump?

Yes.. I also have an Exedy stage 1 clutch thats going in and I know what I need to get. I did a lot of research on everything. I am mostly just curious about how a boosted stock b18b1 will perform and how reliable it will be. Also if anyone has suggestions on a turbo.

 

[heykosal]

well reliability has a lot to do with the tuning. just make sure you take it to a reputable place, or have the know how to do it yourself.

 

[Ericb]

i posted earlier, but its didnt show. so ill post the short version. install what you got + the other needed items, then get it tuned for like 5-7 psi

 

[Spody02]

this has a bunch of stock motors that are boosted
http://www.team-integra.net/forum/display_topic_threads.asp?ForumID=12&TopicID=231916&PagePosition=2

like the 4th post in has a b18b1making like 227
and another making 270
both are stock

 

[Ominous G2]

Engine: Bone stock LS, arp headstuds, edelbrock IM, crane stage 2 turbo cams
Mods: Peak boost kit, gt30r .63a/r, 3" exhaust, no cat, RC 750cc, 3bar map sensor, walbro 255lph HP pump, Neptune
Tuning at 12psi on 93 octane:
335whp

 

[Winki]

I am working on boosting my stock b18b1. I am just curious if anyone here has already done this and what parts they used. Also some dyno numbers would be great.

I would like to get around 200WHP and here are the parts I have so far.

40mm Greddy Type RS BOV
38mm Tial Waste Gate
Stainless Steel Ram Horn Manifold
Precision 525cc Injectors

I would like to go with a T3/T4 A/R 63 turbo.

if yu have a good tuner 200whp will be easy just dont get an ebay mani or turbo and such and you will be fine.

 

[JDMxDB8]

Get a Hondata S100 w/ Boost Option.