Engine trouble

irocktheda9

New Member
if its doing that, its most likely the starter. If your hearing that clicking then its your relay going on within your car. if you hear clicking outside of the car(engine bay) its the starting pushing out but not turning.

I think its a bad starter, my car has the same problem. I just have to push start it until i buy a new starter.

By the way, have you tried push starting your car??? if your car is stick.
 

Aussie

Zoom-Zoom
I said nothing about timing. If it's just clicking and not turning over then your starter is probably bad.

if its doing that, its most likely the starter. If your hearing that clicking then its your relay going on within your car. if you hear clicking outside of the car(engine bay) its the starting pushing out but not turning.

I think its a bad starter, my car has the same problem. I just have to push start it until i buy a new starter.

By the way, have you tried push starting your car??? if your car is stick.
Thank you.
 

Acura2Gen

New Member
the car starts now.they put it on time but. when the timing was off it just click when the valves opened and hit the piston. so vavles bent i got to take apart and buy the valves and take it to machine shop.
 

Kuchtaboy

Unregistered User
Aussie said:
Thank you.
all 15 of his posts seem to be "more technical" repeats of what other people have said.. I freaking HATE when people do that..

Bent valves suck... but the car runs with bent valves right now?
 


Acura2Gen

New Member
all 15 of his posts seem to be "more technical" repeats of what other people have said.. I freaking HATE when people do that..

Bent valves suck... but the car runs with bent valves right now?
Yes the car is runnig just boged down.and waste a tank of gas in two days.rpm is like at 500 and drops when i make stops.
 
Top