s2000 cluster project
- Thread starter konerri
- Start date
konerri
New Member
yes it is. this is a project car between me and my other two brothers, who are currently attending UTI Houston. We're are going to finish this project when they come back. Ones working towards performance/diagnostics and the other is working on autobody/paint. All i can say is this car going to be badass in about 2 years.
konerri
New Member
so got everything together, and started the project....don't mind the mess. It's engineering at its best...
now it's half working at about 90 percent working but not 90 percent done. the project is only 20 percent done.
here the links to the half done vids on youtube...
http://www.youtube.com/watch?v=kv3fUHEmVy8
http://www.youtube.com/watch?v=NvXx_WWCS1o
now it's half working at about 90 percent working but not 90 percent done. the project is only 20 percent done.
here the links to the half done vids on youtube...
http://www.youtube.com/watch?v=kv3fUHEmVy8
http://www.youtube.com/watch?v=NvXx_WWCS1o
Ominous G2
┌∩┐(◣_◢)┌∩┐
Thats lookin pretty good, cant wait to see the end result.
Ominous G2
┌∩┐(◣_◢)┌∩┐
How are you going about the bezel?? Using the integra with a backing/filler plate?
konerri
New Member
my cluster and two sets of plugs costed me $220 i guessing that it will cost me another $50 to build my all-in-one converter.
konerri
New Member
haven't thought about it much yet. installation is the easy part. making the electronics work is harder. i am currently working on the conversion software right now. Now i got to bring out the oscilloscope and function generators. let the fun begin.
Blackassassin
LS=Likely Slow
looking good so far
DailyDB8
>>>Honda Enthusiast<<<
pm'd
konerri
New Member
time for an update again.
So far so good until today. Found out that the integra speedometer isn't very accurate. Reason i say this is because the s2000 gives you a digital readout(very accurate). Where as for the integra, i am eyeballing the reading off my ls speedometer. So, overall still good but may not be accurate to +/-4 percent of actual reality speed. Government requires all US cars to have that close of a tolerance.
As for generating a speed readout on the s2000 cluster, this was successful. here are some spec for the s2k cluster, the following information could not be found anywhere in the internet because I tried to look for something to compare too and can't find shit.
to get mph you must supply a 12v square, 20 percent duty cycle wave to the signal input at the rate of ....
speed(MPH) S2000(hrtz) Integra(Hrtz) Ratio(s2k/integra)
0 0-100 0 0
10 500 15 33.33333333
20 940 26 36.15384615
30 1340 38 35.26315789
40 1800 48 37.5
50 2230 59 37.79661017
60 2640 70 37.71428571
70 3090 80 38.625
80 3500 91 38.46153846
90 3910 101 38.71287129
100 4310 112 38.48214286
110 4810 123 39.10569106
120 5240 134 39.10447761
I am going to need a digital speedometer for an integra in order to finish to get specs to where i would like them to be. SO DOES ANY HAVE ONE THAT I CAN BUY FOR CHEAP OR BORROW?
Look at ratios and you can clearly see why a direct wire hook up to the integra VSS signal will not work.
Enjoy guys..... The only reason why i am giving out this information(could of kept it private) is for the better of our site and to promote the world of automotive electronics. Because when it comes to engine building, information is left and right but electronics are discussed, things are too quite.
So far so good until today. Found out that the integra speedometer isn't very accurate. Reason i say this is because the s2000 gives you a digital readout(very accurate). Where as for the integra, i am eyeballing the reading off my ls speedometer. So, overall still good but may not be accurate to +/-4 percent of actual reality speed. Government requires all US cars to have that close of a tolerance.
As for generating a speed readout on the s2000 cluster, this was successful. here are some spec for the s2k cluster, the following information could not be found anywhere in the internet because I tried to look for something to compare too and can't find shit.
to get mph you must supply a 12v square, 20 percent duty cycle wave to the signal input at the rate of ....
speed(MPH) S2000(hrtz) Integra(Hrtz) Ratio(s2k/integra)
0 0-100 0 0
10 500 15 33.33333333
20 940 26 36.15384615
30 1340 38 35.26315789
40 1800 48 37.5
50 2230 59 37.79661017
60 2640 70 37.71428571
70 3090 80 38.625
80 3500 91 38.46153846
90 3910 101 38.71287129
100 4310 112 38.48214286
110 4810 123 39.10569106
120 5240 134 39.10447761
I am going to need a digital speedometer for an integra in order to finish to get specs to where i would like them to be. SO DOES ANY HAVE ONE THAT I CAN BUY FOR CHEAP OR BORROW?
Look at ratios and you can clearly see why a direct wire hook up to the integra VSS signal will not work.
Enjoy guys..... The only reason why i am giving out this information(could of kept it private) is for the better of our site and to promote the world of automotive electronics. Because when it comes to engine building, information is left and right but electronics are discussed, things are too quite.