the small part of skunk2 short shifter

404 Da Teg

Dre Da KID


^^^I dont know what it is..


well i dont know what it is because i researched all info about shifter shorter. i dont see anyone didnt say anything about that part.. that part stopped me to replace shifter because i dont know what it is. i aint sure if do i need that part,, I dun want to pull shifter out of gearbox when i m driving.. who know! .... I got skunk2 knob and skunk2 dual bend shifter with me.. that part came with shifter in the box when i bought it from a guy. i shld asked him what it is but i was in hurry and left to go work. But my opinion is that part is for replace from oem parts.. well jus correct me if im wrong.. let me know asap
 

dc2GS-R

Super Moderator
It looks like the bottom bolt that holds the bearing/bushing that goes on the bottom of the shifter and connects to the change (shift) rod
 
Last edited:

404 Da Teg

Dre Da KID
really but i did test my shifter and part to connect tog before install. i see it has no room for bolt to wrap on
 


dc2GS-R

Super Moderator
The change rod goes over the bottom part of the shifter and then the bolt goes through to hold it together. It will work once the change rod is there. The 2 metal bushing goes inside between the rod u joint and the bottom of the shifter. The bolt holds it all together
 

404 Da Teg

Dre Da KID
i got it nowww. thanks!! i gonna install it by tmw or sat.. i cant do today due to heavy raining.. LAME! chuckles
 

404 Da Teg

Dre Da KID
Update:

im DONE! everything's GOOD! i drove n do chnage gear with that AND I LOVE IT ALREADY! also I CAN FEEL IT MORE THAN MY IDIOT STOCK SHIFTER.. lolzz here it is








 

dc2GS-R

Super Moderator
So you left the shift boot hanging like a limp dick? Why does everyone do that? Put a rubber grommet on the shifter or zip ties on the shift boot to hold it up.

Seems like a Honda thing or something, this is the only scenario where I constantly see people with droopy shift boots. It takes an extra $.50 and maybe 5 minutes
 

DC2Integ

I ♥ My Integra
dc2GS-R said:
So you left the shift boot hanging like a limp dick? Why does everyone do that? Put a rubber grommet on the shifter or zip ties on the shift boot to hold it up.

Seems like a Honda thing or something, this is the only scenario where I constantly see people with droopy shift boots. It takes an extra $.50 and maybe 5 minutes
Click to expand...
X2 i cant stand seeing the shifter si put a zip tie underneath the coller so it will stay up. problem solved.
 

dc2GS-R

Super Moderator
Or when you put the shifter in from the bottom you can just force a rubber o-ring grommet around it before you put it in and it will hold the boot up. (that's what I did) Integra's are the only car that I constantly see droopy boots on and I can't understand why.....it's so easy and looks so much better
 
You must log in or register to reply here.
Top