endo617: 98 Ej6 Project: Balanced Form
- Thread starter endo617
- Start date
endo617
Rattle Can Technician
lol poor tranny
Engine bay getting painted.
Engine is in
Started up no problem. Having a bogging issue, I think its the MAP sensor.
Samurai_Blue
Yolo Whippin'
vtec motors you dont need a cam holder. There are holes in the girdle that allen keys fit into to hold the cams in place.
endo617
Rattle Can Technician
I don't really need it, just for my convenience and makes it easy to install cam gears.
R13
The other asshole
endo617
Rattle Can Technician
I had some wiring issues again, got rid of the garbage engine harness and bought a fresh obd2 EX harness and decided I needed piece of mind so I bought a cabin harness too.
Got it all done today, also fixed my bogging issue. Quick search suggested it was the Ignitor, swap it out and it's good now. Need to break the clutch in finally. I only put 4.7 miles since the swap lmao terrible.
I can finally get to the important stuff, koni/GC setup, wilwood brake kit and new camber kit. Also waiting for some new goods to come in the mail.
Got it all done today, also fixed my bogging issue. Quick search suggested it was the Ignitor, swap it out and it's good now. Need to break the clutch in finally. I only put 4.7 miles since the swap lmao terrible.
I can finally get to the important stuff, koni/GC setup, wilwood brake kit and new camber kit. Also waiting for some new goods to come in the mail.
endo617
Rattle Can Technician
I never posted it but I purchased a Yonaka catback. Fitment was garbage and sounded horrible, I sold it and only lost like $20. Ordered a Tanabe Medalion right after. Fit perfectly and sounds very conservative considering I'm running a test pipe too.
Getting the OE hanger welded on the chassis
Strut King pedals
Getting the OE hanger welded on the chassis
Strut King pedals
Last edited:
endo617
Rattle Can Technician
I was planning on using a C Clamp and my antitheft pedal club to help. We'll see how it goes. Cant be any harder than the stuff ive done these last few weeks Lol.
endo617
Rattle Can Technician
Finally back to summer mod
SPC adjustments, great but ball joints were weak and arm was too bulky to be functional. Hard Race, why not. Had their Extended Ball joints for years and still using their Toe Adjuster.
Installed, I've pretty much replaced the front end completely lol.
Strut King pedals almost complete. Need to find the OE plastic to install the gas pedal.
SPC adjustments, great but ball joints were weak and arm was too bulky to be functional. Hard Race, why not. Had their Extended Ball joints for years and still using their Toe Adjuster.
Installed, I've pretty much replaced the front end completely lol.
Strut King pedals almost complete. Need to find the OE plastic to install the gas pedal.
endo617
Rattle Can Technician
Thanks bro
Summit pulled through, rotors were on back order until May 12th. Decided to keep the ones that came with the kit and the BP10 pads until I do my autox on May 14th. Want to see how this setup does before my track day on May 27th.
