ArmaSwiss's DC2 LS Project Thread

ArmaSwiss

New Member
[/IMG]

Well, a few weeks ago I picked up this 1994 LS from a buddy of mine, 5-Speed Manual.

Bought it with DC Headers, GSR Tranny and some aftermarket clutch that had been installed by the owner who sold it to my friend. Also had an aftermarket CAT (now replaced) which was not CARB certified, so I replaced it while getting it smogged for the transfer of ownership.

My current project plans are purely physical, and slightly mechanical.

Physical Project List:
Exterior Matte Red with Matte Black trim
Interior Vinyl Black with Red Trim
Seats Black with Red Trim (Possibly looking for black seats with red stitching)
Changing out the Cluster bulbs to Red.
Gauge Swap to Red Gauges.

Engine Work:
Replacing the Downpipe as the previous owner (Before my friend) had found a curb and dented the downpipe and migged shut a hole (No leaks though)




Beginning pictures (Will be adding more as I get materials and put it all together) Right now, she's just like I purchased her with no changes physically.



The DC2 next to my old DA9




My two Integras and the Mom's Civic DX in the backround

 
Last edited:

dlo253

Active Member
red gauges and red cluster lights? alrighty then.
plan on painting the engine bay to match this scheme, or have it clash horribly? lol.
 

Sammich

Active Member
whoo....that header looks murdered...nice start tho
 


ArmaSwiss

New Member
dlo253 said:
red gauges and red cluster lights? alrighty then.
plan on painting the engine bay to match this scheme, or have it clash horribly? lol.
Click to expand...
Oh the engine bay will be painted eventually, when I have a day and a spare car so I can pull the engine and clean it out. Probably will do it when I finally get to doing a B18 headswap to a b18 VTEC head. But honestly. It's a street car, not going to the track (yet) so I'm not even sure on the head swap yet. My priorities right now are just physical. Get some dents out, exterior and interior color before starting to work on mods. But the red gauges are a maybe. Still have to finalize my interior color schemes. Probably going to adjust the trim to Red, and with the 94 LS interior, there's not much trim. The plastic casing infront of the cluster would be red, but I'd have to see if the red gauges would work well with it or not. :D

Sammich said:
whoo....that header looks murdered...nice start tho
Click to expand...
Well the downpipe/test pipe. The headers bolt onto it, so I don't have to replace my whole headers. Just need to get the test/down pipe and bolt a new one on. My buddy didn't even know it and was shocked to see it. Luckily it's a simply 45$ part
My headers, I'm guessing this is accurate, Go from 4 to 2 -> then a 2nd piece which is a 2 to 1, and connects to my Cat.

EDIT: It's a 4-2-1 header. Opps

I'll try to snap some pics of the condition of the interior. Seats are pretty faded. Header is tan ,_, Vinyl has some tears and cuts on the doors.
 
Last edited:
You must log in or register to reply here.
Top