Noise when turning

yetti

yetti
Like the tittle says i have noise when i turn sometimes. I replaced the cv axles a couple of months ago cuz the boots were torn and clunked. But it still made the noise even after the cv were done. Since then ive also done the lower ball joints. I cant figure out what wouod be making that clunk noise when i cut the wheel to either side. Could it be my steering rack?
 

Muckman

Not a M0derator
Have you inspected the suspension? Look at all 4 CV joints again.
 


96LSteg

Jemel
it could be that your tire is rubbing on the plastic mud guard in the wheel well. I had this issue. You should check to make sure that its secured and that your tire isnt making contact when you cut the wheel. I would also lift the car and make sure that there is nothing hanging loose under the car and also make sure that all bolts are tighted (or torqued) to spec and then go from there. Also it would help us to help you diagnose if you posted a video of you car making the sound that you are talking about.
 
You must log in or register to reply here.
Top