ROTY 2013: daddybuiltracing

DaddyBuiltRacing

Resident Asshole
Categories:
Best 94-97 Style
Best 4dr Integra
Best Forced Induction Integra
Best Overall Integra/RSX

Specs:
Bottom End
84.5mm Benson Sleeves
Pauter Rods
10:1 CP Pistons
ACL Bearings
ARP Main Studs
Polished/Balanced Crank
Moroso Oil Pan
Rotating Assembly Fully Balanced and Blue Printed
Speed Theory Block Fittings

Top End:
Full Port and Polish
Deburred and Re-Worked Combustion Chambers
Skunk2 Pro 1's
01 ITR LMA's
Crower Springs
Crower Retrainers
Supertech .5mm Oversized Valves
KMS Bronze Guides
BDL Cam Gears
Go-Autoworks Cam Seal
ARP Head Studs
Golden Eagle Headgasket
Edelbrock Victor X Intake
Hondata Intake Manifold Gasket
Phearable.net 70mm Throttle Body
Blox TPS Sensor
NGK Irridium 9s
B&R Billet Distributor Cap
Shaved Valve Cover
(2) -10an Fittings Welded in Valve Cover

Drivetrain:
Built by Mista Bone aka Tranzex aka Transbone
GSR Transmission
Cpmpetition Clutch Twin Disc
ARP Flywheel Bolts
ARP Pressure Plate Bolts
MFactory Helical LSD
MFactory Magnetic Drain Plug
MFactory Differential Bearings
Gear Speed Carbon Coated Synchros
Torco RTF Fluid
Go-Autoworks Braided Clutch Line Kit

Boost Goodies::
Precision 6262 Journal Bearing T3 Vband .82ar
Precision 46mm Wastegate
PWR Intercooler
Deatschwerks 1000cc Injectors
Go-Autoworks Hood Exit Downpipe
Go-Autoworks Dump Tube
Go-Autoworks Turbo Blanket
Go-Autoworks GT Series Oil Catch Can
Go-Autoworks Pro Series Black Oil Line Kit
Go-Autoworks Intercooler Piping Kit 2.5" w/black couplers
HKS Limited Edition Black Blowoff Valve
Speed Factory 4 Bar Map Sensor
Autometer Sport Comp Black Faced Boost Gauge
AEM Uego Wideband
PWM Boost Solenoid
Go-Autoworks Push Lock Vaccum Kit
Hondata s300 Tuned by Steve Wilson@ Pro Car Associates

Fuel/Mounts:
Innovative Racing Mounts 85a Bushing (Powder coated same color as valve cover)
Full-Blown Twin Walbro Setup
Aeromotive Fuel Pressure Regulator
Aeromotive Fuel Filter
Edelbrock Fuel Rail
Jegs Liquid Filled CF Fuel Pressure Gauge 0-100PSI
Jegs AN Fittings (Black)
Jegs SS Line (Black)

Exterior:
2010 Infinity Midnigh Mocha Paint
VIS OEM Carbon Fiber Hood
15x7 Drag DR21's (Rpf1 knockoffs) Gold with Silver lip
Lenso VPD's (Satin Black)
Mickey Thompson 24.5x9x13 slicks
V2 Competition Rear Skinnies
MH 24.5x3.6x15 Rear Skinny Tires
Go-Autoworks Rear Bumper Diffuser

Suspension:
Ground Control Coilovers
Koni Yellow Struts
Skunk2 Upper Control Arms (Front)
Skunk2 Lower Control Arms (Rear)

Cooling:
Go-Autoworks Radiator
Go-Autoworks Slim Fan
Go-Autoworks Radiator Shroud

Interior:
Quad-Pod Cluster Bezel and Clock Gauge Bezel
Autometer Sport Comp Black Faced Oil Pressure Gauge

Engine Bay:
Shaved/Tucked
Kens Kustom Chassis Booster Delete
Jegs Battery Relocation Kit
Jegs Remote Battery Terminals
Manual Rack Conversion
Energy Suspension Rack/Pinion Bushings
A/C Removed
Power Steering Removed
ABS Removed


Pics:

1.



2.



3.



4.



5.


7.
 

96LSteg

Jemel
you didnt follow rule 801 paragraph 3 subsection A

it states: ALL DRAG CARS WITH SWEET MANIFOLDS AND OUTLAW MOUNTED TURBOCHARGERS AND HOOD EXIT EXHAUSTS MUST POST A VIDEO OF THE CAR IDLING AND REVVING! (This only exists in my head)

Rules are rules lol
 

MiketheDyke

My job is clean toilets
96LSteg said:
you didnt follow rule 801 paragraph 3 subsection A

it states: ALL DRAG CARS WITH SWEET MANIFOLDS AND OUTLAW MOUNTED TURBOCHARGERS AND HOOD EXIT EXHAUSTS MUST POST A VIDEO OF THE CAR IDLING AND REVVING! (This only exists in my head)

Rules are rules lol
Click to expand...
LMAO!!

Sent from my phone
 

Accel.speed

basically, i like fast!
96LSteg said:
you didnt follow rule 801 paragraph 3 subsection A

it states: ALL DRAG CARS WITH SWEET MANIFOLDS AND OUTLAW MOUNTED TURBOCHARGERS AND HOOD EXIT EXHAUSTS MUST POST A VIDEO OF THE CAR IDLING AND REVVING! (This only exists in my head)

Rules are rules lol
Click to expand...
Hahahahahahahah

This car is why I don't run for ROTY haha. You should slap some steelies on there and be sleeper status 8)
 

DaddyBuiltRacing

Resident Asshole
Bwahahaha I will take a video just for you today sir! I have been busy with our toy drive and getting my finals out of the way.

BTW, everyone should run for these awards, I have been beat out by cars I personally wouldn't have expected to. So you never know, maybe you will win and if so that's cool. You can't win if you don't enter!!!
 


DaddyBuiltRacing

Resident Asshole
Thanks, my buddy actually made it. I traded him a GSR trans for it that I picked up in a garage sale haha. I went out to buy 1 part, left buying the entire garage full of stuff. It needed some work to make it perfect (had to have flanges milled) but other than that I am happy with it. Anxious to see how it does on a track next year
 

DaddyBuiltRacing

Resident Asshole
Haha yeah the hood exhaust and 10 point roll cage sort of give it away. Although at night time the exhaust isn't noticeable unless it's shooting flames and the cage is concealed by the darkness as well.
 
You must log in or register to reply here.
Top