jbrown97ls
Active Member
I suck and this is no different than my last ROTM submission like a year ago.
I really need to finish my turbo build :???:
1997 DB7
This is a list of all the parts currently on the car. I'm currently saving for a kit and gathering up turbo parts as I go.
EXTERIOR:
1997 DB7
Adriatic Blue Pearl
Amber painted corner lights
New OEM mud guards
Color matched replica (Bayson-R) ITR lip
Color matched side skirts
L.E.D. Taglights
INTERIOR:
Blue L.E.D. cluster
Charcoal carpet (StockInteriors.com)
OEM floor mats
L.E.D. Map lights
L.E.D. Dome light
L.E.D. Trunk Light
Broadway mirror
Black vinyl armrest (DIY)
DB8 ITR driver side window switch
Dream-catcher
ENGINE:
USDM OBD1 B18C1
Bored to 81.5mm
Balanced rotating assembly
Weisco 10:1 pistons
Eagle H-Beam rods
ARP head studs
Clevite main bearings
Clevite rod bearings
ARP exhaust manifold studs
Re-seated valves
Align Honed
Super-Tech valves (Standard size,Dished)
Super-Tech valve guides
Super-Tech springs
Super-Tech Ti retainers
Gates Racing timing belt
New OEM head gasket (copper sprayed)
New OEM water pump
New OEM oil pump
Moroso oil pan
Almost all engine gaskets/seals are OEM replacements
Skunk2 cam seal
Hasport mounts (70A)
Hardrace torque mounts
OEM GSR intake/throttlebody
OEM exhaust manifold
OEM exhaust and muffler
AEM Fuel Rail
Go-Autoworks Rail to Filter Fuel Line
TRANSMISSION:
LS Transmission
ACT Streetlight flywheel
Stage 2 Competition Clutch
ARP flywheel bolts
ARP pressure plate bolts
stock axles
AUDIO:
Sony Explode head unit
Amp switch
Bass knob
One 12” Kicker CVR
custom carpeted fiberglass sub enclosure in rear right of trunk
800 watt Volfenhag amp
FatMat on trunk, floor boards, doors, roof
SUSPENSION:
Skunk2 Pro S V2 Coil-over’s
Buddy Club P1 front camber kit
Buddy Club P1 rear camber kit
Energy Suspension front upper and lower control arm bushings
WHEELS/BRAKES:
949Racing 6UL 15X7 +36 NICKEL
949Racing black lugs and valves
Toyo Extensa HP 195/55/15
Stoptech blank rotors
Hawk HPS pads
custom "A logo" centercaps
calipers painted black
**Above photos shot by Max Krubsack** (Max's Flickr)
Subscribe to my build thread(in my sig) if you like what you see and want updates as to how the build is going!k:
I really need to finish my turbo build :???:
1997 DB7
This is a list of all the parts currently on the car. I'm currently saving for a kit and gathering up turbo parts as I go.
EXTERIOR:
1997 DB7
Adriatic Blue Pearl
Amber painted corner lights
New OEM mud guards
Color matched replica (Bayson-R) ITR lip
Color matched side skirts
L.E.D. Taglights
INTERIOR:
Blue L.E.D. cluster
Charcoal carpet (StockInteriors.com)
OEM floor mats
L.E.D. Map lights
L.E.D. Dome light
L.E.D. Trunk Light
Broadway mirror
Black vinyl armrest (DIY)
DB8 ITR driver side window switch
Dream-catcher
ENGINE:
USDM OBD1 B18C1
Bored to 81.5mm
Balanced rotating assembly
Weisco 10:1 pistons
Eagle H-Beam rods
ARP head studs
Clevite main bearings
Clevite rod bearings
ARP exhaust manifold studs
Re-seated valves
Align Honed
Super-Tech valves (Standard size,Dished)
Super-Tech valve guides
Super-Tech springs
Super-Tech Ti retainers
Gates Racing timing belt
New OEM head gasket (copper sprayed)
New OEM water pump
New OEM oil pump
Moroso oil pan
Almost all engine gaskets/seals are OEM replacements
Skunk2 cam seal
Hasport mounts (70A)
Hardrace torque mounts
OEM GSR intake/throttlebody
OEM exhaust manifold
OEM exhaust and muffler
AEM Fuel Rail
Go-Autoworks Rail to Filter Fuel Line
TRANSMISSION:
LS Transmission
ACT Streetlight flywheel
Stage 2 Competition Clutch
ARP flywheel bolts
ARP pressure plate bolts
stock axles
AUDIO:
Sony Explode head unit
Amp switch
Bass knob
One 12” Kicker CVR
custom carpeted fiberglass sub enclosure in rear right of trunk
800 watt Volfenhag amp
FatMat on trunk, floor boards, doors, roof
SUSPENSION:
Skunk2 Pro S V2 Coil-over’s
Buddy Club P1 front camber kit
Buddy Club P1 rear camber kit
Energy Suspension front upper and lower control arm bushings
WHEELS/BRAKES:
949Racing 6UL 15X7 +36 NICKEL
949Racing black lugs and valves
Toyo Extensa HP 195/55/15
Stoptech blank rotors
Hawk HPS pads
custom "A logo" centercaps
calipers painted black
**Above photos shot by Max Krubsack** (Max's Flickr)
Subscribe to my build thread(in my sig) if you like what you see and want updates as to how the build is going!
k:
Last edited: