R13
The other asshole
I should post the string of texts from you in the funny picture thread :lol:
^.^Anything Goes Chat for Noobies!^.^
- Thread starter G3GirL
- Start date
OneFastGSR
Member
Beat you to it
OneFastGSR
Member
One of my friends has a DC Integra NON ABS brake setup. Includes booster, non abs master cylinder, prop valve and lines, $150 shipped. I have no pics though
dc2GS-R
Super Moderator
osiris19
Active Member
I'm from CC lol. I like being the oddball out with an integra. There's only a few of us over there with Teg's.
Sent from my Nexus 7 using Tapatalk 2
OGstackadoIIa
TEAM LlGHTSPEED RACING
Ohhhhhhhhhhhhh shit, be sure to pick up your copy of Honda Tuning and flip directly to this car. Lightspeed, baby!!
OneFastGSR
Member
Local pawnshop has a super clean s13 240sx with a RB swap. Too bad it's a convertible.
OLDSKOOLACURA
New Member
That's sweet, they love me hahahahaLocal pawnshop has a super clean s13 240sx with a RB swap. Too bad it's a convertible.
]
Posted from my garage
OneFastGSR
Member
lol
OneFastGSR
Member
Anyone know anything about this cylinder head? http://www.ebay.com/itm/Honda-VTEC-Head-B16-Series-Performance-Aluminum-Cylinder-Head-NEW-/170803933661?pt=Motors_Car_Truck_Parts_Accessories&hash=item27c4b531dd&vxp=mtr
I mean obviously it's a b16 vtec head but it's not a oem casting or anything from the looks, So can anyone find any info on these? I was thinking about getting one to build
Looks like it's made from Procomp... http://www.store.procompelectronics.com/index.php?target=categories&category_id=811
So anyone know anything about Procomp? Lol
I mean obviously it's a b16 vtec head but it's not a oem casting or anything from the looks, So can anyone find any info on these? I was thinking about getting one to build
Looks like it's made from Procomp... http://www.store.procompelectronics.com/index.php?target=categories&category_id=811
So anyone know anything about Procomp? Lol
Last edited:
TheSkygun
New Member
i just don't like that you dont see a picture of the actual one you'd be buying, just a generic picture
Honda V-TEC B16 Head
PC3162
Performance Aluminum Cylinder Head
This listing is for a brand new in the box aftermarket performance cylinder head to fit the Honda B16 engine. It will also accommodate any B series engine wishing to run a B16 V-Tec Head. This is a brand new casting, not used. This head has brand new valve guides and 3 angle valve job cut into the seats. Why rebuild your stock heads when you can start with a fresh head that is specifically designed to perform better than a stock head.
The Speedmaster Engineering Aluminum Cylinder Head Feature:
Hardened Seats
High Grade Aluminum
3-Angle Valve Seat Design
Available fully CNC Machined
Compatible with stock components
Advanced Port Design for Greater Flow
Please call us if you have any questions 909-605-1123
Honda V-TEC B16 Head
PC3162
Performance Aluminum Cylinder Head
This listing is for a brand new in the box aftermarket performance cylinder head to fit the Honda B16 engine. It will also accommodate any B series engine wishing to run a B16 V-Tec Head. This is a brand new casting, not used. This head has brand new valve guides and 3 angle valve job cut into the seats. Why rebuild your stock heads when you can start with a fresh head that is specifically designed to perform better than a stock head.
The Speedmaster Engineering Aluminum Cylinder Head Feature:
Hardened Seats
High Grade Aluminum
3-Angle Valve Seat Design
Available fully CNC Machined
Compatible with stock components
Advanced Port Design for Greater Flow
Please call us if you have any questions 909-605-1123
OneFastGSR
Member
Found a post from honda-tech that made my decision to just go oem.
This was posted by 4piston racing
They aren't CNC ported...just a casting like OEM. It isn't a bad casting, but its not as nice as OEM. I bought some to run through the CNC and they turned out OK. The casting didn't machine as nice as the OEM metal, and the port is shaped different so we were going to have to make program changes for our port profiles to work well and I didn't think they would be big sellers. I have some new in the box I'll sell for $280 shipped. At that price it might be worth you taking a look at.
This was posted by 4piston racing
They aren't CNC ported...just a casting like OEM. It isn't a bad casting, but its not as nice as OEM. I bought some to run through the CNC and they turned out OK. The casting didn't machine as nice as the OEM metal, and the port is shaped different so we were going to have to make program changes for our port profiles to work well and I didn't think they would be big sellers. I have some new in the box I'll sell for $280 shipped. At that price it might be worth you taking a look at.
OneFastGSR
Member
Whatchu guys think about a corvette wagon... Rofl
