Apexi ws2

gsr_nikhil

Member
Does anyone have just the muffler welded to steel piping? I was thinking of buying just the muffler instead of the full $500+ for the full catback and I already have an aftermarket cat as well as 2.5 inch piping. I'm just worried about how it'll sound...
 

Nick_C78

New Member
I do. I have the muffler just welded to some piping from a cheapie axle back. Mine probably isn't the best judge for sound though as I have shitty header and 2 resonators, but yeah.
 

simplels

New Member
I was going to do the same thing.. get the Apexi universal 3" turbo muffler and get the kteller 2.5" cat back piping with a 2.5" to 3" adapter.. wouldve cost a little bit cheaper than going with the full catback from Apexi.
 

Samurai_Blue

Yolo Whippin'
Wait i dont have a ws2 loool! oops sorry. I have a Greddy SP2 and Skunk2 Mega Power. They switch depending on the track. Its usually the mega power. Because i havent been dinged yet at thunderhill.
 

gsr_nikhil

Member
Wait i dont have a ws2 loool! oops sorry. I have a Greddy SP2 and Skunk2 Mega Power. They switch depending on the track. Its usually the mega power. Because i havent been dinged yet at thunderhill.
Have a video anyway? Lol let's just make this an exhaust rev thread
 

Samurai_Blue

Yolo Whippin'
[YOUTUBE="SP2"]_oCt-i24XqA&list[/YOUTUBE]
[YOUTUBE="mega power"]Bv3vdh0Bt1s[/YOUTUBE]

both of these are my car one with the sp2 and one with the megapower same b pipe and both are mufflers attacched to some piping


The sp2 is with a B18B the Megapower is with my current motor.
 

gsr_nikhil

Member
[YOUTUBE="SP2"]_oCt-i24XqA&list[/YOUTUBE]
[YOUTUBE="mega power"]Bv3vdh0Bt1s[/YOUTUBE]

both of these are my car one with the sp2 and one with the megapower same b pipe and both are mufflers attacched to some piping


The sp2 is with a B18B the Megapower is with my current motor.
Current being gsr?
 
Top