My 95' Acura Integra

simplels

New Member
Ted's Owner said:
I went from 1 to 2 to D3 to D4. If I would've thought about it, that would've been my clue that it was a 4-speed, ha-ha.
Click to expand...
you don't need to go from 1 to 2 to 3 to 4..

just D3 to D4.. it does pretty well at shifting from 1 to 2 to 3 when you plant your pedal.. then you pull on D3 till redline and then upshift to D4..
 

bkirshr

User that is Registered
1 and 2 are first and second gear respectively ONLY (if you are in 1, you will only ever be in 1st. 2, you will only ever be in 2nd.) D3, will go through gears 1, 2, and 3 (like normal), but not go into 4th. D4 goes through all 4 gears.
 

AcuraIntegra 95

New Member
I'm going to be pulling my engine this week to get to the transmission and clutch. Any tips?
 


99TegLs

Senior Member
1. you dont need to pull the whole engine. 2. if you do, tape all connections and label them/ color code them. Makes it soooo much easier to reconnect. 3. empty the trans before you take it out, otherwise you're gunna have a bad time. 4. Are you doing a 5 speed swap or just screwing with the auto?
Hope this helped
 

AcuraIntegra 95

New Member
99TegLs said:
1. you dont need to pull the whole engine. 2. if you do, tape all connections and label them/ color code them. Makes it soooo much easier to reconnect. 3. empty the trans before you take it out, otherwise you're gunna have a bad time. 4. Are you doing a 5 speed swap or just screwing with the auto?
Hope this helped
Click to expand...
I'm just fixing the transmission and getting a new clutch. And yes thank you!
 

AcuraIntegra 95

New Member
Also does anyone or anyone know someone who wants a set of chrome euro taillights? They are in really good shape!
ImageUploadedByTapatalk1356149771.539968.jpg
 


You must log in or register to reply here.
Top