Mercercountyeg
New Member
DD. My only car. I changed duty stations. My car is in ohio right now. Im saving $ to ship it out here to AZ..
Not so noob. K Series!
- Thread starter Mercercountyeg
- Start date
1caintegra
type-s and the RS
rotas are fine wheels. Good luck on the swap should be pretty sick
OGstackadoIIa
TEAM LlGHTSPEED RACING
NemesisCBR
Boredest Member
fuck me sideways... im not afraid of you :drive:
K serious ha
It was a good try patrick.
Mercercountyeg
New Member
It seems like not many K series ppl here?
whitedc4
Well-Known Member
I'm only the second person in Oklahoma to do one in an integra. There are plenty In eg's and what not.
Had I known that originally I had an endyne head I wouldn't have swapped everything out. Buuuut I didn't even bother to notice the stamp
I try and get most of my info from the Internet but of course it's not always true.
Had I known that originally I had an endyne head I wouldn't have swapped everything out. Buuuut I didn't even bother to notice the stamp
I try and get most of my info from the Internet but of course it's not always true.
Ominous G2
┌∩┐(◣_◢)┌∩┐
Thought about it, a few times. Car is looking nice.
JDMxDB8
Raceline USA
There are a couple. Most of us are still rocking the B.
NemesisCBR
Boredest Member
I thought about it too for a future mod but its just not cost effective to swap for power. Oil pan clearance scares me.
XjoEnX
Active Member
Is that a known issue? I still plan to do this in the future when budget permits.
NemesisCBR
Boredest Member
I believe it is. I never researched it myself since i wasnt anywhere near serious consideration yet but i know there was a mount kit developed that helps with clearance. You can somewhat tell from his picture even, hes not slammed and his oil pan sits fairly low.
Mercercountyeg
New Member
K20a.org has a thread of oil pan clearances. Check it out. Dont be nervous. Just dont run the cast a2 oil pan.
Mercercountyeg
New Member
Also im running a k24. I taller "vc to oil pan" height than a k20