Smackinassvtec
New Member
yeah 14.053 @ 99MPH. 60Ft @ 2.167, was really aiming for 13.9s atleast
OGstackadolla's Track Whore and Build Thread
- Thread starter OGstackadoIIa
- Start date
OGstackadoIIa
TEAM LlGHTSPEED RACING
Personal Best for Buttonwillow #1 CW - 2:27.xxx
Lost my brakes after the 2nd session again, but decided to go back out again until my brakes gave out
Had an amazing time racing and spending time with everyone at the track, it's a bummer none of the folks could come out, but I understand where everyone is with cash - maybe next time
[YOUTUBE="final session"]E9Vf4YFxx40[/YOUTUBE]
[YOUTUBE="2nd session"]wNIkFlpmi8c[/YOUTUBE]
Lost my brakes after the 2nd session again, but decided to go back out again until my brakes gave out
Had an amazing time racing and spending time with everyone at the track, it's a bummer none of the folks could come out, but I understand where everyone is with cash - maybe next time
[YOUTUBE="final session"]E9Vf4YFxx40[/YOUTUBE]
[YOUTUBE="2nd session"]wNIkFlpmi8c[/YOUTUBE]
Samurai_Blue
Yolo Whippin'
do you have thadyas rotors and did you resurface them?
OGstackadoIIa
TEAM LlGHTSPEED RACING
Yee, I do. i didn't have time to resurface them, so I went as-is. I didn't have any issues with that, it's completely hydraulic
Samurai_Blue
Yolo Whippin'
you sure? Because im 100% sure the brakes didnt bed in. The HP+ need a clean surface to bed into...and your master cylinder is fine. It doesnt leak. If the HP+ were not making hidious screeching sounds when lightly braking they werent broken in. It takes a while to do so, i had brake problems when i slapped them in right before a track day. They worked 100% better after they sounded like nails on a chalk board. Another thing would be your abs. Do you have an abs light?
OGstackadoIIa
TEAM LlGHTSPEED RACING
No abs light, but I see fluid under the module. Brakes squeak, but it's not horrendous. But this issue is absolutely hydraulic and very reminiscent of last time
OGstackadoIIa
TEAM LlGHTSPEED RACING
Only difference is, this time I felt more comfortable with beating on the car with less than perfect brakes
Samurai_Blue
Yolo Whippin'
just spray brake cleaner under the abs motor. and clean it up. That way we can confirm that its an issue with the abs. Is there an issue with fluid missing?No abs light, but I see fluid under the module. Brakes squeak, but it's not horrendous. But this issue is absolutely hydraulic and very reminiscent of last time
OGstackadoIIa
TEAM LlGHTSPEED RACING
Nah, fluid is always full.
Samurai_Blue
Yolo Whippin'
only other thing is a vacuum leak
ZaWn
New Member
That's what my Carbotechs sound like now. Have to keep my windows up lol.you sure? Because im 100% sure the brakes didnt bed in. The HP+ need a clean surface to bed into...and your master cylinder is fine. It doesnt leak. If the HP+ were not making hidious screeching sounds when lightly braking they werent broken in. It takes a while to do so, i had brake problems when i slapped them in right before a track day. They worked 100% better after they sounded like nails on a chalk board. Another thing would be your abs. Do you have an abs light?
-Z-
NemesisCBR
Boredest Member
really?? good pads are gonna squeal no matter what? im gonna need a dedicated track car... im too used to luxury...
OGstackadoIIa
TEAM LlGHTSPEED RACING
Tom, you need to grow a pair of man nuts. Are you running at thunderhill?
Samurai_Blue
Yolo Whippin'
Justin said he had something for me to try and it makes them more quietThat's what my Carbotechs sound like now. Have to keep my windows up lol.
-Z-
OGstackadoIIa
TEAM LlGHTSPEED RACING
Updated OP with lap times and videos