Sept. 2012 ROTM : dc2man1119

DC2MAN1119

New Member
1994 Integra
Suspension/Wheels
Skunk2 Pro Sereies2 Coilovers
2" Suspension Techniques Drop Forks
Asr Rear Subframe Brace
Blox LCA's
GSR Front Strut Tower Bar
No Name Rear Strut Bar
Drag DR-31's 15"x7" et40
Dunlop Direzza 205/50/15
Russel SS Brake Lines
Russel SS Clutch Line

Interior
NRG Steering Wheel
B&M Dual Bend Short Shifter
Greddy Weighted Shift Knob

Exterior
Type "R" Replica lip (cracked)
OEM side markers-$50
OEM Skirts
GSR Wing Delete
Rear Wiper Delete
Antenna Delete

Engine Bay/Motor
Full Tuck-AC/PS/CC/ABS Delete/Engine Harness/Sub Harness
Bay Painted 1957 Chevy Black
SS Washer and Phillips screw set
All Brackets Painted Black
B18B1-Stock-Painted High Temp Aluminum
New Oil Pan Gasket
New Valve Cover Gasket
New Timing Belt
New Valve Cover Bolts
New Cam Seal
New Axles
Short Ram Intake
Spectre Intake
OEM Exhaust manifold/Exhaust piping to OBX Exhaust
Stock LS Transmission-Painted High Temp Aluminum
Exedy OEM organic Clutch
XTD 9 lb. Flywheel
Bolt Boys "Spikes" Strut valve cover camber arms fuel rail

Only Use Honda OEM Parts.













 

XjoEnX

Active Member
Nice ride! I noticed it looks like your shock towers were cut and raised. Did you do that yourself? I was considering doing this too.
 

OGstackadoIIa

TEAM LlGHTSPEED RACING
Lol, so your car is in pieces? It looked pretty good before, aside from the scrapes and dents. Dummy ass low
 

DC2MAN1119

New Member
OGstackadoIIa said:
Lol, so your car is in pieces? It looked pretty good before, aside from the scrapes and dents. Dummy ass low
Click to expand...

No its not in pieces. Those last three pictures were from when i was redoing the engine bay. The first couple pictures are of it in its current state. i murdered out the engine bay aside from the aluminum painted block/tranny and the ss lines around.

It's been backed into 3 different times. no one said shit. kinda ruined it.. oh well. on the prowl for a new shell anyway.

"Nice ride! I noticed it looks like your shock towers were cut and raised. Did you do that yourself? I was considering doing this too. "

This is actually on the to do list. They may look like that because my Camber arms sit on my shock towers and slam on them all the time so it pushed them up and cracked the paint bad. but oh well.. lol i've seen a lot of people do it. its no big deal. i want to be lower but my towers wont let me, and i refuse to just have a hole there. thats ghetto as fuck.
 


XjoEnX

Active Member
LOL! It is hard to make it look good. It looks cool the way this ITR owner did it. I might follow this method since my shock towers are probably going to be dented when I drop it lower.

 

DC2MAN1119

New Member
XjoEnX said:
LOL! It is hard to make it look good. It looks cool the way this ITR owner did it. I might follow this method since my shock towers are probably going to be dented when I drop it lower.

Click to expand...
I dontt know man, a hole in the shock tower scares me. It's just... a high stress area.
 

klutchDb7

ლ(ಠ益ಠლ)
4x4 status I see.... :lol: looks good man, how's you bump up the towers? Mine have kinda just adjusted themselves bu smashing up there but I don't want my uca's doing all the work and I'm tired of the clunking haha
 

DC2MAN1119

New Member
klutchDb7 said:
4x4 status I see.... :lol: looks good man, how's you bump up the towers? Mine have kinda just adjusted themselves bu smashing up there but I don't want my uca's doing all the work and I'm tired of the clunking haha
Click to expand...
For right now my ucas just sit on the shock towers at all times. its like i have no suspension up front but i just havent gotten around to doing something about it since i have a daily driver and another project at the moment. I wish i would have done something before i redid my engine bay. but oh well. i will be getting a new shell soon enough and redoing the project from the ground up with a lot of goodies and new ideas that people havent ever done yet on a teg. so once i get that ball rolling, everyone needs to prepare.
 

TheMyth

Member
XjoEnX said:
LOL! It is hard to make it look good. It looks cool the way this ITR owner did it. I might follow this method since my shock towers are probably going to be dented when I drop it lower.

Click to expand...


I did this same thing to the shock towers about 14 years ago. I really didn't like it myself, knowing what I know now. But the way these guys did this setup looks good compared to mines back in the day.. lol My upper control arms would come in the engine bay about 2"!
 
You must log in or register to reply here.
Top