New Guy From NY My DC4 Build!
- Thread starter ATEGGY94
- Start date
G3GirL
UUUHHHH-OOOOHHHHHHH...!!!
lol :slap:
Hmm...there shouldn't be swirl marks. That can easily be taken care of, though. It'll make the black look just that much better. Is that fresh paint?
stillhere153
HondEducated
when you doing black interior... ?
ATEGGY94
New Member
Yea fresh paint i took it to get wash they started with a broom
I was like NOOOOOOO!
But how do you fix that? Again its barely noticeable
Im thinking a nice compound wash then wax?
ATEGGY94
New Member
Haha! thanks bro i needed that from you
ATEGGY94
New Member
Im looking around for part outs i found this 1 guy but he was acting suspect i might just save for a decent parts car and take it all from there and part the rest or a junk yard if you know anyone lmk
ATEGGY94
New Member
So now im going for the sway/subframe Camber Kit and Tie Bar replace a couple of bushings
If you guys recomend a specific brand please let me know and which ones i should replace that often go bad im thinking the trailing arm bushings and etc.
Then new rotors better pads paint my calipers black(every1 has red) and change my wheel bearings
Do i change the bearings or the hub? I get mixed answers
If you guys recomend a specific brand please let me know and which ones i should replace that often go bad im thinking the trailing arm bushings and etc.
Then new rotors better pads paint my calipers black(every1 has red) and change my wheel bearings
Do i change the bearings or the hub? I get mixed answers
stillhere153
HondEducated
what parts you need, I just took the alternator for $40 off this bad boy
people are going to say get the asr kit with the beaks bar
me, imma say get the itr sway usdm or jdm (1mm) size difference
then bwr, datum1 or whichever is cheap on ebay then get the optional beaks bar
for camber kit pm me for good front one, for rear any brand is fine so long as it is not "jdm sport"
for the trailing arm bushing HARDRACE or OEM ONLY
the rotors and pads I got a kit from fastbrakes slotted and drilled was pretty cheap, and if you replace wheel bearings pressing them into the hub, I always press in new wheel studs when I remove the hub
if you need help with anything I am local, have tools and got skills
ATEGGY94
New Member
what parts you need, I just took the alternator for $40 off this bad boy
people are going to say get the asr kit with the beaks bar
me, imma say get the itr sway usdm or jdm (1mm) size difference
then bwr, datum1 or whichever is cheap on ebay then get the optional beaks bar
for camber kit pm me for good front one, for rear any brand is fine so long as it is not "jdm sport"
for the trailing arm bushing HARDRACE or OEM ONLY
the rotors and pads I got a kit from fastbrakes slotted and drilled was pretty cheap, and if you replace wheel bearings pressing them into the hub, I always press in new wheel studs when I remove the hub
if you need help with anything I am local, have tools and got skills
i can always use a hand so yeah deffinatly i usually buy all at once so by mid or late august id have everything suspension wise
did that integra still have the interior pieces?
stillhere153
HondEducated
hunts point
ATEGGY94
New Member
lol figured ima pass by on sunday see what they have
so if you need to get things too let me know we go together take a few pics n shit