car won't start after new transplant!!

1.8l_dohc_92

New Member
So i rebuild a b18 block with itr pistons.
I got a 1999 ls head
everything new.
So i tried starting my car after putting it all together connecting.
-fuel pump kicks in
-theirs spark
-starter kicks in
and the car wont start i get the smell of gas and im thinking that theirs no combustion.
Any ideas guys! Need help!!!:(
 

natt2000

New Member
make sure your ignition wires are installed properly, that they have the correct firing order. then make sure your cams are in time, and in sync with the motor.
 
Last edited:

1.8l_dohc_92

New Member
timming is good
firing order is correct
theirs no combustion what so ever
-theirs spark in the plugs
-theirs fuel
-it cranks but dont start
everything you can think of is new
my car sound exactly sounds like this video
http://www.youtube.com/watch?v=SXJfecA9ZdA&feature=related


i just noticed that i have a gap between my engine block and my crank pulley
 


Last edited:

scubajosh12

91 Integra
have you tested your compression yet. may have an issue with rings if your not getting combustion. if you get fuel and spark the only thing missing is compresion.
 

flekr

New Member
scubajosh12 said:
have you tested your compression yet. may have an issue with rings if your not getting combustion. if you get fuel and spark the only thing missing is compresion.
Click to expand...
I haven't
I'm going to get one soon. ill reply as soon as i get it.
 


You must log in or register to reply here.
Top