New Integra

1995GS-R

New Member
99TegLs said:
not as bad as i first thought. looks pretty dam good except for those few minor details you pointed out! gl and welcome to CI!
Click to expand...
Thanks man I really appreciate it, everything will get sorted out in an appropriate amount of time.



Update:
Took my handy dandy paperclip out and jumped the connector to sort out my check engine light. Gave me a 41 (Primary oxygen sensor heater). I also had an ABS light so I got that number as well, 18 (High pressure system). O2 Sensor is easy, and I'm considering doing an ABS delete so that would fix that light coming up as well.
 

1995GS-R

New Member
Well looks like on top of the o2 and the ABS I'll have to add fixing the exhuast to the list. Right past the header its literally just a pipe sliding into another one....So looks like I'll be headed off to try to get it welded for a temporary fix and then replace it down the road. Another thing was I have a slow oil drip from what looks to be the oil pan. Next oil change will include dropping the pan and throwing some RTV on there with the gasket and try to seal that mess up.
 

1995GS-R

New Member
JDMxDB8 said:
Love that color... Nice pick up! Needs a little work though.
Click to expand...
Thanks, I'll end up with it back on Championship White though...Always favored that color over all the other OEM Acura/Honda colors. Work is being blueprinted out, I've only owned the car for 3 days so progress will pick up in time.


Thinking of picking up a set of motor mounts that somebody is selling local and filling them with poly to replace the mounts I have now as I am suspecting that it was a trashed mount that ripped my exhaust apart (though it was more likely a shitty weld job). From there I'd get the exhaust re-welded and then replace the o2, all while preparing to drop the pan and fix the leak. After getting all of those issues sorted I can then start gathering the parts for my ABS delete. If anybody has any input that would be great, or if you think I should start with a different route let me know!
 


1995GS-R

New Member
Small update..

Inteded to update this early but things have been pretty hectic, but I finally got around to ripping out all the carbon fiber stickers.


Sadly this is how much was in there total, I'll take another picture of the interior once I get all the old adhesive off.

Installed my license plate relocation plate, took a whopping 5 minutes lol


Also got my superbright leds in and swapped those out so I could actually read my tach.

before

after

Ripped out all the wiring for the system that was in there, previous owner stripped all the speakers out, so I figured I didn't need the wiring anyway. Got under the car and saw that the left and right torque mounts are shot, so I'll be picking up a set of ITR mounts with the ES inserts here shortly. Then its getting the horribly welded exhaust fixed, and then finally the o2...So hopefully here in the next couple weeks I can get that wrapped up and then work on some bodywork with some misc interior ramp ups as well.
 


1995GS-R

New Member
Victory!

Ordered my new torque mounts and ES inserts today. Still looking at hitting a junkyard here local (gotta find one that I can go pull parts at) and pick up a few other pieces. Hopefully more to come soon.
 
You must log in or register to reply here.
Top