what did you do to your car today?

[covert_Con]

thats actually really bad if you put those breather filters on.

Yeah, I hope you haven't started the car since you put it on.

 

[dariel89]

yeah didnt help, i just need to find some stock struts, take that bottom piece off and switch it out with mine, after i cut the btch in half to get it out from underneath the car, pissed me off because its all easy stuff but being that everything is rusty sucks


IF ANYONE HAS A SET OF THESE PIECES THAT GO AT THE BOTTOM OF THE STRUT ID BE HAPPY TO TAKE THEM OFF YOUR HANDS PAYPAL $$$ READY

Yo would ek one fit you lmk, i got ek ones

Sent from my PG86100 using Tapatalk

 

[dariel89]

was gonna lower the teg, so started to take out the front struts but the damn bolt at the bottom of strut broke

Where you going to change the shocks, because the big fork that on yours broke, there is a small bolt on the middle that you can loose it and it will come off without losing the lower bolt.

Sent from my PG86100 using Tapatalk

 

[dariel89]

Never mind i use a big tube to loose them and spray the car at them for a minute

Sent from my PG86100 using Tapatalk

 

[Samurai_Blue]

Yeah, I hope you haven't started the car since you put it on.

it will run you just dont have a complete pcv system which allows blow by to stay in the motor and not be sucked out. for the most part.

 

[99tegjawn]

I stripped the bumpers and fenders getting ready for primer


Sent from my iPhone using Tapatalk

 

[covert_Con]

it will run you just dont have a complete pcv system which allows blow by to stay in the motor and not be sucked out. for the most part.

Yeah that's what happened to my old integra before i totaled it. If i'm correct you'll loose coolant to right?

Oh and I cleaned my IACV and replaced a few hoses that were cut.

 

[BeatBox]

Beatbox pm me I have all 4 stock struts off my db7

i just need the hook looking things lol with the bolt not stripped or broken
thanks tho :thumbs up

Where you going to change the shocks, because the big fork that on yours broke, there is a small bolt on the middle that you can loose it and it will come off without losing the lower bolt.

Sent from my PG86100 using Tapatalk

well i was gonna replace the springs on them, that middle bolt is the one that fcked up
i dont wanna mess with taking all the extra stuff to get it out when it shouldn't be a PITA as its trying to be
i did use a small bar and barely put force on it and it snapped


did lower the rear, cut the springs I KNOW I KNOW not the normal way, but the springs are front lowering springs from an accord plus my teg doesnt have a "normal" system in it
then put on my fit wheels
car wash too

 

[el_tigre]

Get my typeR boot


---
I am here: http://maps.google.com/maps?ll=40.216923,-74.743354

 

[Samurai_Blue]

Yeah that's what happened to my old integra before i totaled it. If i'm correct you'll loose coolant to right?

Oh and I cleaned my IACV and replaced a few hoses that were cut.

no

 

[bdawgxi14]

I shortened the hose to my cold air. Thing was hella long and ugly looking.

 

[DaddyBuiltRacing]

I got my car some new shoes, size 15's just like its owner...btw IDGAF if they are knockoffs or not legit enough. I highly doubt anyone notices at 140+mph lol

 

[pinkley]

Well I have another project and here is the intake I got today in the mail. Went to town on it a few hrs ago knocking off the casting seams. Not even close to being finished.

When I got it today

A few hrs ago

 

[5ive-0]

i put on my cf gurney flap and cf bumper air duct

oh snapped a pic of my copilot reppin the lakeshow lol

 

[BeatBox]

that air duct piece looks pretty nice

the piece on the spoiler looks like someone will walk by and take it lol