Front bumper side bends out... How to fix beside zip ties?

2Quick

New Member
I'm not sure if you guys would know what I'm talking about but the side of my front bumper in both sides near wheels are bending out as if someone as bump into my bumper. Some people said the bumper warp bur I don't think so. Only got the car for 8 months and it was ok. I tried to push it in but it bends right back.

If I buy a 98 99 bumper would it still be the same as it would be the frame holding it that's causing the problem or it would be ok.
I will try to post pics once I take em tomorrow for you guys.
 

Ganyon

Active Member
Try taking it off and re-align it. Could just be outta wack and needs to be put back on.
 

Hot.Damn.

newb and awesome
You might have tapped a curb and broke the tab in either the fender or bumper that the bolt goes through.
 


johnnymass

New Member
Take it off and check out the bumper stiffeners. One of holes in the bumper could've ripped. If so, it won't be an easy fix.
 

imsoappalled

New Member
9 screws underneath the hood and 4 underneath the car also you have to disconnect the signals
 


nismoasfuh

New Member
Bumping I have the same problem. I'm missing the inner plastic but I doubt that's the problem

Sent from my SGH-I897 using Tapatalk
 

99tegjawn

New Member
Drill a hole through the bumper and the plastic and use a tiny nut and bolt


Sent from my iPhone using Tapatalk
 

BeatBox

Real Good!
99tegjawn said:
Drill a hole through the bumper and the plastic and use a tiny nut and bolt


Sent from my iPhone using Tapatalk
Click to expand...
that ^ ^ ^

here is a pic of what u should do, if YOU CAN get the small oem clip and get the screw(junk yards) any honda will have it
push them to line up and you should be good to go

here is what u should do once you get the clips


or are you still trying to take the bumper off?
 
You must log in or register to reply here.
Top