DIY: Change gauge cluster lights/ Under dash neons

TheSkygun

New Member
haha im gonna do it tomorrow and ill let you know how it goes, i tried a little tonight but decided to wait for more light and to reread the guide to make sure i know what im doing
 

klutchDb7

ლ(ಠ益ಠლ)
Yea don't be too scared about messing anything up on the climate control guys, as soon as the hazard and defroster buttons are out, there really isn't anything to break :thumbs up

I will be updating this for installing map, dome and trunk lights this weekend as well
 


Ganyon

Active Member
haha im gonna do it tomorrow and ill let you know how it goes, i tried a little tonight but decided to wait for more light and to reread the guide to make sure i know what im doing
I was like that with my cluster. Then I took it out before I ordered the lights to see how easy it was. I might attempt the cruise control. Idk yet.
 

TheSkygun

New Member
the dome light is easy but i got the 3022-CWHP4 and I needed to bend the spot it clips into a little to make it fit.

gah i should have done the cruise control while i did the cluster >.<

yeah but those two buttons are harder to get out the i thought, i saw a spot that looks like it fits a flat head, i guess thats where i should try to get it free from?
 

klutchDb7

ლ(ಠ益ಠლ)
Yep, stick a flathead in there and shimy it out.
 


TheSkygun

New Member
coolbeans. ill be doing that tomorrow then ill upload pics of the results. also is it possible to do the lights where the automatic is (showing what gear your in)
 

TheSkygun

New Member
since ill be working on it tomorrow ill pull it apart to see if i can figure it out and ill look on superbrightleds and see what i can find unless klutchdb7 is on top of the game on that one too
 

klutchDb7

ლ(ಠ益ಠლ)
I actually have not looked in to that one as I can't even see them cause of my shift boot /: but feel free to take a look for sure, I'd be interested to know myself :)
 

TheSkygun

New Member
haha ill do my best, superbrightleds doesnt have a specific light for it so ill see what i find out. currently figuring how to paint my calibers purple
 

TheSkygun

New Member
alright, so i finished and figured out how to get the bulb out for the auto gears. i took lots of pics too and just need to see what bulb would fit in its place. once i do i can send it to kluchdb9 to add or just make a new one?
 
Top