Won't run

emd513

New Member
Alright guys I decided to replace my cylinder head with the ported and polished and freshly shaved head that u just built. In the process I decided to finish my mild wire tuck. No cutting just rerouting. I have checked everything. Have fire fuel and air. Check the timing its dead on. Now when I rerouted my starter wire I acidently grounded it out didn't k ow it till I went to start it and nothing happen. Fixed that got it to fire over but will only act like it wants to start but will never actually crank. Friend of mi e thinks it could be the main relay. But with it being bad will it still try to crank. Checked all wires there good and I run iridium plugs and they have awesome spark. Fuel coats the plugs after trying to crank for a while. What is causing it
 

emd513

New Member
I really need this fixed im driving my Grandads ford truck which just so happen to catch on fire today due to a trans leak. Which he forgot to mention luckily was able to put it out before damage and fix it but damn will the shit ever end
 

emd513

New Member
I just realized that I put want instead of wont. Fucking bad day all around. Any input would be great
 

emd513

New Member
Well looks like I answered my own quest. I feel like Im new with this one. 100 hours a week at work have got me not thinking g when I do s***. I forgot that when you shave your head that you have to retard the timing. Was reading g my old honda tunning magazine and ran across the article on cam decreeing and it hit me.what a noob move. Maybe this will help someone else though
 


emd513

New Member
Well that didn't work so im going to try advancing it tomorrow Nd test my dist. I hope that didn't go out
 

emd513

New Member
Yeah. I thought I was set perfect but the dist. Didn't do anything and a guy on honda tech told me to do a comp. Test and found out I was only at 60 psi. So I advanced my intake and exhaust instead of retarding it like I have read a tooth at a time an ended up at 8 degrees which is 4 teeth and got 180psi and she runs
 


You must log in or register to reply here.
Top