Bud E
New Member
I have been trying to halp a friend. Her brake lioghts were stuck on and I replaced the stop light switch. What a pain. Brake lights are fine now but the starter won't crank. Good batt voltage and absolutely no voltage drop when ign is in start position. I bypassed the clutch interrupt switch(even a bigger pain to get to) with no results. I have spent a lot of time looking around under the dash to see if I knocked something loose and see nothing weird. The car starts and runs fine if I bump start it. The pitiful Chiltons manual I bought mentions a 24A start/run fuse but does not tell me where to find it and there is no 24A fuse in either fuse block. Any ideas?