Winki
Undercover mod
I've got nothing better to to so i figured i'll start a new thread.
well a friend of mine has an 89 EF Civic with a XSI B16, shit you not this is the fastest stock b16 civic i have seen, seen him beat turbo integras and he's only aboe to click off 14.5 at the track, but any who it is and ugly swap wires and shit everywhere so here is the best pic i found
well last night we started tucking just the driver side sounds a lot eaiser than it is.
the idea is to run all that crap (wires and washer hoses) by the driver side in and through the fender frame, so here we go fender off bumper off and headlight off thats the start, we un hooked every thing pulled it back through the fire wall (not very easy) then you have to put acouple thing back out the fire wall, next we figured out that the harnes was not gonna be long enough and that not all of the connectors (most but like 2) would fit through the fender anyways so we had to cut and add extra wire to all of there effin wires and tha is a lot of fuckin wires to lable. after that though out from under the dash to the fender area through some rubber/plastic thing we poped out. into the fender and out the hole in front.
Any who i didn't really mean to make it sound so much like a DIY but just how much of a diff it make it looks so good so he'll prob take pic then i will post them of that side finished, i guess the headach was worth it.
uess i'll see what i can do for the teg
well a friend of mine has an 89 EF Civic with a XSI B16, shit you not this is the fastest stock b16 civic i have seen, seen him beat turbo integras and he's only aboe to click off 14.5 at the track, but any who it is and ugly swap wires and shit everywhere so here is the best pic i found
well last night we started tucking just the driver side sounds a lot eaiser than it is.
the idea is to run all that crap (wires and washer hoses) by the driver side in and through the fender frame, so here we go fender off bumper off and headlight off thats the start, we un hooked every thing pulled it back through the fire wall (not very easy) then you have to put acouple thing back out the fire wall, next we figured out that the harnes was not gonna be long enough and that not all of the connectors (most but like 2) would fit through the fender anyways so we had to cut and add extra wire to all of there effin wires and tha is a lot of fuckin wires to lable. after that though out from under the dash to the fender area through some rubber/plastic thing we poped out. into the fender and out the hole in front.
Any who i didn't really mean to make it sound so much like a DIY but just how much of a diff it make it looks so good so he'll prob take pic then i will post them of that side finished, i guess the headach was worth it.
uess i'll see what i can do for the teg
