Will these shocks fit my 93

larp

bay area chillin
Need suspension help!

Neuspeed Race springs assembled with Tokico blue shocks from 96 Integra LS

Will this setup work for my 93??

Tokico blue HP Gas Struts is HU3713 (rear) and HU3457 (front)
 
Last edited:

larp

bay area chillin
Should I start with good springs or a ground control setup?
I'd like to keep it smooth.
 

DumaDa9

New Member
ground controls on tokico blues isnt going to be a smooth ride. To fit the dc shocks in the front you'll need the forks from an eg, dc, or ek. The back should fit, i have dc shocks on the back of my car
 
ground controls on tokico blues isnt going to be a smooth ride. To fit the dc shocks in the front you'll need the forks from an eg, dc, or ek. The back should fit, i have dc shocks on the back of my car
I bet your rear is dumpt. My 91 was when I had DC shocks on it.
 


larp

bay area chillin
Now i'm looking at just springs,
A set of Sprint = $100 2"
set of Tein = $150 don't know the drop
I want the 2".
Does anyone know witch will be the better ride?
I know I'm changing my plan every time a different deal comes up,
I'm trying to get the best bang for the buck on a low budget
Thanks again...
 
Just save up for some Function Form Type I's or some Omni basic coilovers. You wont get dampening adjustability from either, but you'll get more height adjustment and the ride will be smoother.
 

larp

bay area chillin
i was thinking about getting a skunk2 coilover kit.. but i heard thats about a 3" drop(?).. how smooth of a ride would that give me?
 

larp

bay area chillin
if you lower your car you dont have a smooth ride.
mm well i guess.. but i'm sure there has to be some variation of how smooth a lowered ride could be.. i'd just like to know the best options for under $275 :stick:
 

DumaDa9

New Member
there is ways to be low with a smooth ride, just not for the money you want to spend. All depends on your spring rates, and the type of shocks that you're using. Extended top hats go a long way too
 

larp

bay area chillin
alright so since my funds are very limited.. for now i'm just gona go with some lowering springs.

what are some good brands i should be looking for?
 
Top