wats the difference

[jdmteg09]

wat model of integra DA better to put a gsr in ...in a 91 or a 92 one ir r they the sam??????

 

[redg2]

i dont think there is any

 

[B18TEG]

the only change is in obd, 90-91 is obd0, and 92-93 is obd1. other than that they are the same.

 

[Kuchtaboy]

the only change is in obd, 90-91 is obd0, and 92-93 is obd1. other than that they are the same.

:thumbs up

and if your swapping, it doesnt matter cause you'll have a new ecu too.

 

[Ominous G2]

Planning on using the GS-R hydro tranny?

 

[g2teg]

the only change is in obd, 90-91 is obd0, and 92-93 is obd1. other than that they are the same.

x3 DA chassis is same for all years 90-91 DA6, 92-93 DA9 enjoy

 

[obd1kenobi]

I much rather use the 92, with it being obd1, wiring and tuning will be easier

 

[Ominous G2]

x3 DA chassis is same for all years 90-91 DA6, 92-93 DA9 enjoy

Nope 90-93s were all DA9, but the JDMs are DA6. Also 92-93 coupes can also be DB2, if you are lucky enough to get the GSR.

 

[Kuchtaboy]

I was wondering about that... I thought my 91 was a DA9, but I wasn't 100%. Was going to check when i got home

 

[DarkDB1]

90-93 2Dr (LS, GS, RS) DA9. 92-93 2Dr GSR is DB2

And the best one of all... 90-93 4Dr is DB1.

 

[g2teg]

90-93 2Dr (LS, GS, RS) DA9. 92-93 2Dr GSR is DB2

And the best one of all... 90-93 4Dr is DB1.

thanks for the clear up my man lol

 

[imcnblu]

yeah, they are all the same except 90-91's OBD-0. 92-92 are OBD-1.

if you swap a GSR motor in there, unless you use a first or second Gen B16 transmission, plan on getting a "Hydro to Cable" conversion bracket as the GSR transmissions were all Hydraulic Clutch operated and your DA integra uses a cable clutch system.