DeaconWagers
car in progress
i don't know if this should be here or in the engine/drivetrain section, but but does anyone know if a valve cover from a 94-up b18b fit my b18a?
Valve cover fitment?
- Thread starter DeaconWagers
- Start date
Ominous G2
┌∩┐(◣_◢)┌∩┐
As soon as I get mine back from the coaters I will show you.
I assume you mean the OBD2 LS, no dips just flat?? That would be 96+ but they are all interchangeable. If you use the OBD2 on the B18A just put a plug in the hole.
I assume you mean the OBD2 LS, no dips just flat?? That would be 96+ but they are all interchangeable. If you use the OBD2 on the B18A just put a plug in the hole.
DeaconWagers
car in progress
okay, that's what i thought, but i wasn't sure. i'm assuming the hole plugged is on the driver's side front?
Ominous G2
┌∩┐(◣_◢)┌∩┐
This one has the 90-95 LS valve cover:
This one has a hose running from the valve cover to the intake manifold. Thats the hole you plug, the above pic dosent have that hose.
This one has a hose running from the valve cover to the intake manifold. Thats the hole you plug, the above pic dosent have that hose.
DeaconWagers
car in progress
thanks a ton. i'm now thinking i'll pull an obd2 cover and paint that one instead of the stock one...
Ominous G2
┌∩┐(◣_◢)┌∩┐
Thats what I did, its cleaner to me.