Turbo Setup Question

konig16

LS Vtec=:)
Im currently building ls turbo setup and this is what i have on my to buy list so far.....

-Treadstone Turbo Kit with T3 turbo
-Hondata S300
-Walbro fuel pump
-RC 440's
-AEM FPR
-2.5in exhaust
-colder spark plugs

I plan to run 7psi daily with this setup.

So what do you guys think???
Sound like a good setup? am i missing anything??
 

B18TEG

BLACK DA
sounds good to me, if you ever decide to ante up the boost, a 3 bar map sensor is what you'll need and who is going to do tuning? i think thats the most important part that youre going to have to consider whether you're running 7psi or 60psi
 
Last edited:

konig16

LS Vtec=:)
B18TEG said:
sounds good to me, if you ever decide to ante up the boost, a 3 bar map sensor is what you'll need and who is going to do tuning? i think thats the most important part that youre going to have to consider whether you're running 7psi or 60psi
Click to expand...
Yeah i only wanna run 7psi becuse its a daily driver but speedquest will most likely end up doing the tune they mainly do honda acura performance. what exactly is a 3 bar map senser though
 


B18TEG

BLACK DA
your stock map sensor behind the tb is only configured to handle a maximum of 11 psi which is like 1 bar of boost, a 3 bar map sensr can handle anything over that till like 30 psi, its so the car wont go into limp mode and or throw a cel
 


mr2 guy

New Member
Isnt N/A pressure at 1bar? So you would need atleast a 2 bar to run boost ryte? BTW me and my friend are going to stick the exacr same setup on his LS, except we'll use a Hondata s200. Good luck man!
 

dc2GS-R

Super Moderator
Atmospheric pressure isn't calculated into the scale. Atmospheric pressure is 14.7 psi which will show 0 bar or 0 psi the way the gauges are calculated. 1 bar will still only show 14.7 psi. We pretty much eliminate the regular outside air pressure as a given. The only place where atmospheric pressure is calculated in is the pressure ratio on a turbochargers compressor map
 
Last edited:

imtheloserone

Banned
mr2 guy said:
I dont think out factory fuel pumps are capable of handling that much fuel injection
Click to expand...
maybe its the Bseries...the kseries we are running 750cc no problem...i'ma run 650cc on mine, its just how much duty ur planning to use, if its more than 90% then a fuel pump would be needed.
 
You must log in or register to reply here.
Top