Turbo Question on a 94 integra LS

Kemikal

New Member
I have a stock integra LS 94, I want to put a turbo kit in it, but i want to run a high PSI How much am i going to have to replace, and how much work would you guys think would be an est. to have it done, im lookin to run about 15-25 PSI of boost. i just want that insane crazyness when it spools :) i want that "i just had a heart attack' Sucked into the seat." Anyways i have about 10 grand to dump into it. how much do you think it will cost. Thanks for all the help guys! (in advance!)


Tom
 

Spody02

Name: Cody
your gonna need a new motor if you wanna run that much boost and you can get a good turbo kit for like 3000 or so

just do a little research
 

Spody02

Name: Cody
it all depends on the motor... its not really good to set a PSI goal. you want to set a power goal and go off that. it all depends on how much power you make on a stock ls i wouldnt run more then 8 pounds on a safe tune, nothing too crazy. if you want to run high psi make sure you get your blocked sleeved. stronger rods, low comp pistons, there is penalty of stuff you can do make it fast and run good. and with 10k you should have no problem doing this
 

Ominous G2

┌∩┐(◣_◢)┌∩┐
If you are getting new internals then you might want to get some sleeves also. Stay away from block gaurds.
 

BIGB90teg

New Member
Easy answer. But u should just search a little more next time ok........ Ur answe is 10k u said u have that much to put into it and want to run a high psi then put the whole F-in wad in there well most in the motor and then the rest on suspension, axles and slicks! Fully built LS head with quality product and good headwork and sleeving the block about 6g's and then about 3000ish for a good kit. And MOST important a badass TUNE and u have an insane 600ish WHP give or take parts depending tire melting machine lol sorry so long but that's my thoughts!
 


Winki

Undercover mod
How much power do you want/
if your looking for a lot your best investment will be a sleeved block
 
You must log in or register to reply here.
Top