Turbo Help!

[xerofx]

hey guys so im new the turbo's and i need a little help on this one. so here it is i found a pretty new gt2870 turbo for dirt cheap and i was just wondering will this work on honda motors. i have a b16a in my 92 integra and im building my turbo kit and i tried researching this but i didnt have any luck so i decided to see if any of you guys can help me out. so will a gt2870 work with my car. any modifications id need to do? i need helpp pleaseee!

 

[Prozon]

Well, you just need a manifold with the correct flange to mount it to.

 

[xerofx]

lol is that it? do you think that this turbo may take longer to spool up?

 

[klutchDb7]

Yes. And the smaller the turbo the faster it will spool. The bigger, the longer it will take

 

[xerofx]

okay thanks guys. also has anyone ever tried using one of these turbos on you g=cars? if so howd you like it?

 

[DaddyBuiltRacing]

Haha a turbo and manifold are not all you need, you need the rest of the turbo kit

 

[Tam4511]

What flanges does it have? Most people use 4 bolt manifolds and 5 bolt downpipes.

 

[xerofx]

guy_from_nerk -obviously i know that thanks for trying to help but i know i dont just put a turbo and manifold on my car and just think that its turbo'd lol

Tam4511 the gt2870 will bolt to a t5/t28 flange

 

[Prozon]

Before just slapping on the first turbo you find, you should really think a lot more into it. What's the power you're trying to put down- how much boost do you need to run with that turbo to get to that power- what are you going to be using the car for? Ect. Ect.

 

[Tam4511]

Go to Garret's site and look at the flow maps.