Turbo Build Pics

[patrick4588]

Just some shots of my progess so far.
SpoolinPerformance Log Manifold
SpoolinPerformance Type 1 Intercooler
SpoolinPerformance Steel IC piping
Walbro 255lph fuel pump
Synapse BOV
Synapse Wastegate
Precision SC34 .60/.63 turbo
Stewart Warner Gauges - boost, oil pressure, oil temp
Stealthmode Oil Lines
Fast Turbo Couplers and Vacuum Manifold

 

[DailyDB8]

where's the snail at? good luck on the build :thumbup:

 

[JayFree]

gluck with the build. cant wait to see the progress!! :thumbs up

 

[patrick4588]

yeah havent got the turbo in yet *sigh*.

 

[BrokenTalon27]

yeah havent got the turbo in yet *sigh*.

I noticed that too. What turbo are you going to run?

 

[Ominous G2]

Thats a big ass FMIC.

 

[patrick4588]

precision sc34 .60/.63
the front mount is 28x9x3 all aluminum hand tig welded. badass intercooler.

 

[BrokenTalon27]

Precison are good turbos. I have an SC61on my car right now.

 

[patrick4588]

you must be running very high hp numbers to run one of those. pretty laggy.

 

[speedin]

you must be running very high hp numbers to run one of those. pretty laggy.

DSM's like big snails.

Oh, I have a T25 on the shelf if you want an instant spooler

 

[BrokenTalon27]

you must be running very high hp numbers to run one of those. pretty laggy.

Not as laggy as you would think. I have the stage 5 wheel, and its a Garret 360 Race center section(which to my reading is a dual ball bearing). I also have head work done. Ill let you know what I get full spool by once its through the break in period and tuned. But before the new motor I had full boost by 3900 rpms( but I was only running 18 psi at the time). Ill keep you all updated.

 

[patrick4588]

that isnt late at all... props to ya.

 

[Cheesenip]

ive got an exra td04...hehe i get full spool at 2900rp with that tiny thing. Caint wait till i afford to go bigger. Good luck

 

[heykosal]

looks good man! good luck with puttin it all together and make sure to keep us updated!!

 

[Puppyeater]

sc34 is not laggy at all...i hit full boost around 3500rpm

nice kit ur puttin in, i would swap out that manifold though, its prolly holding back bout 30-40hp