squiggy
New Member
Kinda new here but been into hondas and acuras for 14 yrs. I've got a question. I just had the main bearings start to fail in my 91 b18 trans. which is an s1. I found a 91 A1 trans. and replaced the clutch and installed the tranny. The problem I now have is that the clutch is always engaged no matter where I adj the plastic nut. I did us the fork and arm assy from the s1 tranny and installed it in the A1, because the A1 arm and fork was all corroded. Does anyone know if they are different? They looked identical. Could that be what the problem is? Please let me know of any ideas, it would be greatly appreciated. Thanks