Tie Rod Jam Nut

[gotgohan]

Okay this mofo is REALLY STUCK I am pretty sure its lefty loosey righty tighty still. I put a 14mm on the outer tie rod and whatever it is for jam nut I forgot what it was. and I put a mofo jack under that wrench and it is NOT moving. but I can get the tie rod loose any ideas?

 

[BrokenTalon27]

Try using some PB Blaster. That and a long wrench.

 

[dc2GS-R]

Use a flare end wrench so you don't round the nut off and get a big ass cheater/breaker bar and some PB Blaster

 

[gotgohan]

whats pb blaster..? I have got a good grip on hte two nuts I just can't get it to budge,, I mean I got the car to lift up on the one wrench trying to loosen the jam nut with a jack under it... thats how tight it is

 

[dc2GS-R]

It's a penetrating catalyst that is used to help break rusted/stuck nuts and bolts loose. You can get it at most auto parts stores

 

[gotgohan]

so wd40 wouldn't do it?

 

[dc2GS-R]

PB works better

 

[jdmjim]

PB x2,sometimes tapping on it helps, but u gotta be careful.

 

[gotgohan]

lol I tapped it with a hammer on the outter part to see if I could knock it loose while the jack was on it.. still nothing I tried that pb still not going I must be going wrong way.

 

[BrokenTalon27]

look at the threading to see which way it goes.