Switching from ACURA to HONDA Badges

[Daybid]

I tried googling it just now and couldnt really find what i was looking for.Not just sites that sell them.

Are there other hondas with a perfect fit if i switch emblems?

Rear trunk H
Rear trunk "Honda"
Front bumper H

Or do i just have to 3m it ? :\

 

[jdmjim]

they all get taped on

 

[Daybid]

!!! dammn even for the Acura one on the left side?

 

[mirrorimg]

Actually the originals have two studs that go through the metal to keep in place, I believe. I don't know if the Honda ones have the same pins but it really wouldn't be difficult to reinstall new ones.

 

[Daybid]

Hmm what about the dc5 integra one..

 

[StoobyMcDooby]

why dont you.....

just take your oem badges off... find new emblems you want.... put 3m double sided tape on emblem... re stick new emblems over old holes. step back and appreciate your work. and if new emblems have studs, grind them off

 

[Samurai_Blue]

Hmm what about the dc5 integra one..

all the ones that say Integra or Honda are just double sided tape the H has pins

 

[heykosal]

There are H badges that have matching studs AND come with double sided tape already stuck on. All you have to do is peel and stick. I found them when I was working at Honda and put them on my teg but I can't remember the part number.

 

[99sil-teg]

Also don't ebay these. I bought front and back oem "H" and they have the studs and 3m tape and it was way easy. I bought a "honda" though and it didn't last and the tape was for crap.... so don't buy them unless they are oem ones... lesson learned lol

 

[94dc4]

I used 3M emblem adhesive on my old car...but that was to put the Acura emblem back on lol. The car came with rear emblems in the armrest because the previous owner said kids kept jacking them. Silly ricers. I looked up what was the best thing to use and the 3M stuff came up. Bought a big tube and barely used any of it.

 

[pluckt007]

back when i didn't know what the hell i was doing, i used super glue.

but hey, they havent come off yet!

 

[Daybid]

UPDATE:: i found pretty good matching size emblems off a legend at pickandpull.
i used 3m and it works pretty good.

 

[bonspeed]

pics.!...

 

[wade]

I have ones off of ebay. and all my pins actually did line up. and as for tape. I used a roofing adheasive. it will come off but its weather proof and super sticky.

 

[94SkankinTeggy]

I do believe that all the emblems will match up.
They will have the matching studs too. But you might as well shave em off...they're really not gonna do you any good of you're just slapping that shit on there with 3m tape. It's the easiest thing you will ever do to your car, really.

(the ones sold on ebay are typically shit. so be careful.)