some body work questions..

[x0supermonkey0x]

hey.. i need some help here.. im about to take off the little spoiler and the emblems on my teg.. would going over the holes with bondo... let it dry for 30 mins and sand and paint fill the holes?.. or do i need some special compound?...

and are the sideskirts paintable?if so.. do i just apply paint or do i need to do more?

where can i get a front grill and how would i go about installing it?...

heres a pic...thanks...

 

[Darrell]

is that teg EBP?

 

[Baldy201]

bondo is fine on the holes but i would look into geting them welded shut. bondo has been known to fall out after a while. As for the side skirts, yea they can be painted, yea you need to do more than just paint them. You need to sand them a little then primer then paint. The grill you can just buy some aluminum screen at Home Depot and do it your self.
you have to take off the front bumper to make the install clean. BTW nice color.

 

[x0supermonkey0x]

EBP??... sorry im kinda new to integras... been around civic bodys alot... all i know is its a DC2 ,LS special edition, B18b1 engine..

thanks for the help.. i think imma go with bondo.. and put hardener on it.. as for the side skirts im just gonna leave it like that until i save enough for front/ rear lip and OEM Type-R side skirts

 

[BlueInteg]

you know those side rubber parts on the door panels? Is it possible to get ride of those and smooth it out by yourself or do i need to do it at a body shop?

 

[Spectacula Acura]

If you mean the side moldings that run across the door and the rear quarter you can remove them your self easily. I did all the body shaving on my teg and its fine.One caution when removing them they are on clips be gentle the metal there is easily bent and you get an outward bend and that is a mega pain to fix. If you need any more help let me know ill give you a step by step guide. plus there are a couple ways you can do it. Hopefully that will help.
AB 8)

 

[95acuraintegls]

you know those side rubber parts on the door panels? Is it possible to get ride of those and smooth it out by yourself or do i need to do it at a body shop?

it is possible did it on my acura and it looks so much slicker than it did...if i had pictures i would show you to insire you to do it..